This short article is mainly focused on the linear sieve and its various applications in competitive programming, including a brief introduction on how to pick out primes and a way to calculate multiple values of multiplicative functions.

# Sieve of Eratosthenes

While this name may sound scary, the sieve of Eratosthenes is probably the simplest way to pick out all the primes in a given range from 1 to *n*. As we already know, one of the properties that all primes have is that they do not have any factors except 1 and themselves. Therefore, if we cross out all composites, which have at least one factor, we can obtain all primes. The following code demonstrates a simple implementation of the said algorithm:

```
std::vector <int> prime;
bool is_composite[MAXN];
void sieve (int n) {
std::fill (is_composite, is_composite + n, false);
for (int i = 2; i < n; ++i) {
if (!is_composite[i]) prime.push_back (i);
for (int j = 2; i * j < n; ++j)
is_composite[i * j] = true;
}
}
```

As we can see, the statement `is_composite[i * j] = true;`

crosses out all numbers that do have a factor, as they are all composites. All remaining numbers, therefore, should be prime. We then check for those primes and put them into a container named `prime`

.

# Linear sieve

It can be analyzed that the method above runs in complexity (with the Euler–Mascheroni constant, i.e. ). Let us take a minute to consider the bottleneck of such sieve. While we do need to cross out each composite once, in practice we run the inner loop for a composite multiple times due to the fact that it has multiple factors. Thus, if we can establish a unique representation for each composite and pick them out only once, our algorithm will be somewhat better. Actually it is possible to do so. Note that every composite *q* must have at least one prime factor, so we can pick the smallest prime factor *p*, and let the rest of the part be *i*, i.e. *q* = *ip*. Since *p* is the smallest prime factor, we have *i* ≥ *p*, and no prime less than *p* can divide *i*. Now let us take a look at the code we have a moment ago. When we loop for every *i*, all primes not exceeding *i* is already recorded in the container `prime`

. Therefore, if we only loop for all elements in `prime`

in the inner loop, breaking out when the element divides *i*, we can pick out each composite exactly once.

```
std::vector <int> prime;
bool is_composite[MAXN];
void sieve (int n) {
std::fill (is_composite, is_composite + n, false);
for (int i = 2; i < n; ++i) {
if (!is_composite[i]) prime.push_back (i);
for (int j = 0; j < prime.size () && i * prime[j] < n; ++j) {
is_composite[i * prime[j]] = true;
if (i % prime[j] == 0) break;
}
}
}
```

As is shown in the code, the statement `if (i % prime[j] == 0) break;`

terminates the loop when *p* divides *i*. From the analysis above, we can see that the inner loop is executed only once for each composite. Hence, the code above performs in *O*(*n*) complexity, resulting in its name — the 'linear' sieve.

# Multiplicative function

There is one specific kind of function that shows importance in the study of number theory — the multiplicative function. By definition, A function *f*(*x*) defined on all positive integers is multiplicative if it satisfies the following condition:

For every co-prime pair of integers *p* and *q*, *f*(*pq*) = *f*(*p*)*f*(*q*).

Applying the definition, it can be shown that *f*(*n*) = *f*(*n*)*f*(1). Thus, unless for every integer *n* we have *f*(*n*) = 0, *f*(1) must be 1. Moreover, two multiplicative functions *f*(*n*) and *g*(*n*) are identical if and only if for every prime *p* and non-negative integer *k*, *f*(*p*^{k}) = *g*(*p*^{k}) holds true. It can then be implied that for a multiplicative function *f*(*n*), it will suffice to know about its representation in *f*(*p*^{k}).

The following functions are more or less commonly used multiplicative functions, according to Wikipedia:

- The constant function
*I*(*p*^{k}) = 1. - The power function
*Id*_{a}(*p*^{k}) =*p*^{ak}, where*a*is constant. - The unit function ε(
*p*^{k}) = [*p*^{k}= 1] ([*P*] is 1 when*P*is true, and 0 otherwise). - The divisor function , denoting the sum of the
*a*-th powers of all the positive divisors of the number. - The Möbius function μ(
*p*^{k}) = [*k*= 0] - [*k*= 1]. - The Euler's totient function φ(
*p*^{k}) =*p*^{k}-*p*^{k - 1}.

It is interesting that the linear sieve can also be used to find out all the values of a multiplicative function *f*(*x*) in a given range [1, *n*]. To do so, we have take a closer look in the code of the linear sieve. As we can see, every integer *x* will be picked out only once, and we must know one of the following property:

*x*is prime. In this case, we can determine the value of*f*(*x*) directly.*x*=*ip*and*p*does not divide*i*. In this case, we know that*f*(*x*) =*f*(*i*)*f*(*p*). Since both*f*(*i*) and*f*(*p*) are already known before, we can simply multiply them together.*x*=*ip*and*p*divides*i*. This is a more complicated case where we have to figure out a relationship between*f*(*i*) and*f*(*ip*). Fortunately, in most situations, a simple relationship between them exists. For example, in the Euler's totient function, we can easily infer that φ(*ip*) =*p*φ(*i*).

Since we can compute the function value of *x* satisfying any of the above property, we can simply modify the linear sieve to find out all values of the multiplicative function from 1 to *n*. The following code implements an example on the Euler's totient function.

```
std::vector <int> prime;
bool is_composite[MAXN];
int phi[MAXN];
void sieve (int n) {
std::fill (is_composite, is_composite + n, false);
phi[1] = 1;
for (int i = 2; i < n; ++i) {
if (!is_composite[i]) {
prime.push_back (i);
phi[i] = i - 1; //i is prime
}
for (int j = 0; j < prime.size () && i * prime[j] < n; ++j) {
is_composite[i * prime[j]] = true;
if (i % prime[j] == 0) {
phi[i * prime[j]] = phi[i] * prime[j]; //prime[j] divides i
break;
} else {
phi[i * prime[j]] = phi[i] * phi[prime[j]]; //prime[j] does not divide i
}
}
}
}
```

## Extension on the linear sieve

Well, it might not always be possible to find out a formula when *p* divides *i*. For instance, I can write some random multiplicative function *f*(*p*^{k}) = *k* which is difficult to infer a formula with. However, there is still a way to apply the linear sieve on such function. We can maintain a counter array *cnt*[*i*] denoting the power of the smallest prime factor of *i*, and find a formula using the array since . The following code gives an example on the function I've just written.

```
std::vector <int> prime;
bool is_composite[MAXN];
int func[MAXN], cnt[MAXN];
void sieve (int n) {
std::fill (is_composite, is_composite + n, false);
func[1] = 1;
for (int i = 2; i < n; ++i) {
if (!is_composite[i]) {
prime.push_back (i);
func[i] = 1; cnt[i] = 1;
}
for (int j = 0; j < prime.size () && i * prime[j] < n; ++j) {
is_composite[i * prime[j]] = true;
if (i % prime[j] == 0) {
func[i * prime[j]] = func[i] / cnt[i] * (cnt[i] + 1);
cnt[i * prime[j]] = cnt[i] + 1;
break;
} else {
func[i * prime[j]] = func[i] * func[prime[j]];
cnt[i * prime[j]] = 1;
}
}
}
}
```

# Example problems

## The Embarrassed Cryptographer

Solution: Simply applying the linear sieve will be enough.

## Farey Sequence

Solution: Notice that Δ *F*(*n*) = *F*(*n*) - *F*(*n* - 1) is multiplicative and Δ *F*(*p*^{k}) = *p*^{k} - *p*^{k - 1}. Then the linear sieve will come in handy to solve the problem.

I don't understand anything. But it looks like something useful so upvote for you.

I understand your comment. So.. upvote for you

@Nisiyama_Suzune do you have any origin reference for this linear sieve? It's amazing it's not well known (as far I know) in the competitive programming world.

It would appear that this technique is established in 1978 by David Gries and Jayadev Misra at the communication of the ACM. They had a paper here. However, I was unable to purchase it so I cannot determine whether it is true.

Yes I have just checked :) Good source...

A linear sieve algorithm for finding prime numbers *-* great post.

Thanks for the compliment:)

I am trying to prove the result of Euler's Totient Function $$$\phi(ip)=\phi(i)\phi(p)$$$, when p divides i. Now $$$\phi(ip) = ip\prod_{q|ip}(1-\frac{1}{q})$$$

Now let's say $$$i=p^kr$$$ where p does not divide r, then I can write $$$\phi(ip) = ip\prod_{q|p^{k+1}r}(1-\frac{1}{q})$$$

$$$\phi(ip) = ip(1-\frac{1}{p})\prod_{q|r}(1-\frac{1}{q})$$$

$$$\phi(ip) = i(p-1)\prod_{q|r}(1-\frac{1}{q})$$$

$$$\phi(ip) = \phi(p)i\prod_{q|r}(1-\frac{1}{q})$$$

But the rest of the term is not $$$\phi(i)$$$, can you tell me what is wrong with this proof??

ϕ(ip)=pϕ(i) but not ϕ(i)ϕ(p), when p divides i.

Oops!!! Thanks, got the result!!

Can someone explain why are we doing

`if (i % prime[j] == 0) break;`

Finally I understood it , Once we reach a number

`i * prime[j]`

where`i % prime[j] == 0`

we know that`i * prime[j + 1]`

will also have`prime[j]`

as the smallest prime divisor.You are right :)

I got stuck on this too. For future reference it is a special case of the fact that when a|(bc) and gcd(a,c)=1, then a|b.

hello there,

i usually write sieve in this style:

isn't the amortized complexity of this algorithm O(n)? or do i understand something wrong?

Based on my knowledge, only crossing out even numbers first does not make a sieve

O(n), so I doubt its correctness on complexity. For instance, 105 will be visited multiple times (for 3, 5 and 7) in your code. Therefore, I think your code still performs in . However, I do think there is not too much difference betweenO(n) and in sieves. The reason why I introduced the algorithm is mainly that it can help to compute the multiplicative functions, where other sieves are less likely to do so.That code in particular is O(nloglogn) since it uses the sum of inverse of primes which is bounded by O(loglogn).

you are there is not much more difference in time complexity of liner sieve and standard sieve algorithm

In your Euler's function, when

X=iPandPdoes not dividei, shouldn't it be`phi[i * prime[j]] = phi[i] * phi[prime[j]]`

? Sincejis only the index of the prime.Awesome blog btw. Keep on with the math notes!

Awww...My bad. Will fix it, sorry!

Can you please share code for mobius function using linear sieve?

In the code for Phi function :

`for (int j = 0; j < prime.size (); ++j) {`

It should be`j < prime.size() && i*prime[j] < n`

Really Awesome blog :) ! Thanks, And Keep Writing

In the

Extension on the linear sieve, in the`i%prime[j]==0`

condition, shouldn't it be`func[i * prime[j]] = func[i / pow(prime[j],cnt[i])] * func[pow(prime[j],cnt[i] + 1)]`

?Its correct in the article. Since f(p^k) = k and also f(i/p^k) = f(i) / f(p^k). (this can be proved as; f(i) = f(p^k * i/p^k) => f(i) = f(p^k) * f(i/p^k) => f(i/p^k) = f(i)/f(p^k))

Note: gcd(p^k, i/p^k) = 1

How to solve the easy problem!! The Embarrassed Cryptographer

Precompute all primes till 10

^{6}, then for every prime less thanLcheck if it dividesK.O(|K| *pi) for each test case wherepiis the count of primes less thanL.Yes but ain't 4 <= K <= 10^100?, how can I do that in c++ without implementing my own BigNum divide/multiply method. Thanks for answering btw :)

You can convert a string into an integer with taking modulo.

Even though the linear sieve has a time complexity of O(n), still, the time taken to iterate through the vector of primes, makes it slower when compared to the classic sieve of eratosthenes. In practice, the classic one with a few modifications like crossing out multiples of 2 in a separate loop and then only dealing with the odd numbers in the "main" loop, is faster.

Proof?

I benchmarked it. You can check it as well.

Link?

I benchmarked locally, no link sorry. You can do and check if you feel skeptical. Time Complexity improvements doesn't always translate to actual execution time improvements.

Can you put the code you wrote in a pastebin or something? It would save a lot of time for others to verify.

I'm not sure if that counts as good benchmarking, but here goes : old vs new seive

Thanks. I slightly changed the old sieve in your code to use i*i instead of i*2. Also made the time measurement more accurate. Also made N = 1e8.

ajkdrag, looks like you were wrong. Linear sieve is almost twice as fast.

https://ideone.com/HMjE7c

And a segmented sieve is even faster: https://ideone.com/d8mlsS

I had Aitken's sieve in my codebase, since I read somewhere that it is very fast. I also benchmarked that implementation, and it turned out really slow. So I decided to play a little bit more, to find a new implementation for my codebase: https://ideone.com/I4piBg. Optimized means, that I skip all even numbers (don't even allocate memory for them, i.e. is_prime[i] checks if i*2+1 is prime).

Here is the pastebin link : https://pastebin.com/exBZdLJK

I checked on Ideone, the time was more for the linear sieve (idk why?)

Don't use Java. The library performance is really bad. Especially for TreeSet/TreeMap.

But I didn't even use TreeSet/TreeMap, I simply used an ArrayList, which is basically an Array itself, to store the primes, and yet the time difference is huge. How so?

Actually the "oldsieve" isn't very optimized. I made a better version based on https://codeforces.com/blog/entry/54090?#comment-382736 which has a complexity of O(n*loglog(n)) and now it's pretty much the same. https://ideone.com/NB3fYR

Maybe with n > 1e10 you start seeing some differences but with n = 1e8 it's pretty much the same (sometimes even a little bit faster).

I think that even though we see the modulo operation (%) as O(1) it's actually heavier than that. If you can replace it with some assembly ninja trick you might get faster

This is quite nice, though I have a small issue with calling it the "linear sieve", especially since there is something called the linear sieve from math which is quite different from what is described here (see for example this blog post by Terry Tao. If this technique is actually related to this, I would be very curious how it is the case that this is related to the ideas behind the linear sieve the link discusses.

Just a note, I think your code for calculating the totient function has an edge case where you don't calculate phi(1). I think you need to set phi[1]=1 at the beginning of your loop.

Nisiyama_Suzune you forgot to mention the following things in your blog:

In your functions to compute euler's totient function and the multiplicative function you didn't write

phi[i] = 1 andfunc[i] = 1 respetively.In both of them you didn't break the loops if

`i * prime[j] >= n`

.You used a further simplification of the formula for

f(ip) which you didn't mention i.e., .It'll be helpful for future readers if you can make these changes in the blog.

BTW, a really good blog.

Regarding 3.: This division trick doesn't actually work when

f(p^{k}) = 0 for somek> 0. In that case you need the original multiplication. It's probably easiest to keep track of bothcnt(i) andp^{cnt(i)}so that the divisioni/p^{cnt(i)}can be done fast.Fixed. Thank you!

It's possible to make this much faster by storing the smallest prime factor of each number while sieving (instead of the current bool). That way you can avoid the expensive modulo check in the inner loop and just do

`if(primes[j] == spf[i]) break;`

instead.This gave a ~4x speedup on my machine.

This optimization doesn't work for me. It actually makes the sieve significantly slower. Am I missing something?

See benchmark here: https://ideone.com/z11b4t

For 1e8, I get .34 without that optimization, and .44 with that optimization. I suspect a large reason why is that doing that optimization requires switching your sieve from a boolean to an integer.

Can anyone explain in the linear sieve algorithm "Therefore, if we only loop for all elements in prime in the inner loop, breaking out when the element divides i, we can pick out each composite exactly once." I don't understand why stoppping when prime divides i allows me to pick out each composite once

In this way we visit each composite x = i*prime[j] only when i is the greatest number that divides it (exluding x itself)*. Therefore, since for every number x there is only 1 such number (its greatest divisor exluding x), we will visit each composite exactly once.

*Proof: We will prove that if i = k*prime[j] (i.e. i%prime[j] = 0), then i is not the greatest divisor of x = i*prime[j+1] (excluding x). Well, since x = i*prime[j+1] and i = k*prime[j], we get that x = k*prime[j]*prime[j+1]. Therefore k*prime[j+1] divides x, and k*prime[j+1] > k*prime[j] = i. QED

Example: (I ran the code given for n = 50 and next to each i I wrote all x = i*prime[j] that were visited in the inner loop. Notice that every composite is only visited once) 2: 4| 3: 6 9| 4: 8|

5: 10 15 25| 6: 12| 7: 14 21 35 49| 8: 16| 9: 18 27| 10: 20| 11: 22 33| 12: 24| 13: 26 39| 14: 28| 15: 30 45| 16: 32| 17: 34| 18: 36| 19: 38| 20: 40| 21: 42| 22: 44| 23: 46| 24: 48| 25: ... (for i = 25 to 49, no x were visited)

Can someone explain this for a divisor function?

where k = 0. Also is the linear sieve approach optimal for these types of multiplicative function?

I think your implementation of the Sieve of Eratosthenes is not as efficient as the standard implementation because the j index loop should only run if i is not crossed out.

Using this the steps performed are much closer to the "linear sieve". As a small benefit we can still write a sieve to compute multiplicative functions (ex. totient) but without needing to index into the prime array. the runtime is not as simple as $$$O(n \log n)$$$. Wikipedia says $$$O(n \log \log n)$$$ which is almost $$$O(n)$$$. As others have pointed out, in practice the difference of $$$O(n)$$$ and $$$O(n \log n)$$$ for reasonable input $$$n$$$ will come down to constant factors like memory access. For large $$$n$$$ ($$$n > 10^9$$$) the bottleneck will quickly be storing $$$O(n)$$$ space. See segmented sieve

Great Post.Are there more examples of problems on multiplicative functions? Solving a few more problems might help understand it better.

Sorry for necroposting, But Can anyone tell me why am I getting TLE verdict in The Embarrassed Cryptographer

CodeP.S the get_rem function is taken from this comment