# Introduction↵
↵
As mentioned in my previous blog, I will be writing a tutorial about slope trick. Since there are already many blogs that goes through the concept of slope trick, my blog will focus more on the intuition behind coming up with the slope trick algorithm. ↵
↵
Hence, if you do not know slope trick yet, I suggest that you read other slope trick blogs such as https://codeforces.com/blog/entry/47821 and https://codeforces.com/blog/entry/77298 before reading my blog. In the future explanation on the example problems, I will assume that the reader already knows the big idea behind slope trick but do not know how to motivate the solution.↵
↵
Great thanks to [user:errorgorn,2022-06-25] for proofreading and writing the section on convex convolution and merchant otter.↵
↵
# When to use slope trick?↵
↵
Most of the time, slope trick can be used to optimise dp functions in the form of $dp_{i, j} = \min(dp_{i - 1, j - 1}, dp_{i - 1, j} + A_i)$ or dp functions containing costs with absolute values. In this kind of dp functions, the graph of the dp function where the x-axis is $j$ and y-axis is $dp_{i, j}$ changes predictably from $i$ to $i + 1$ which allows us to store the slope-changing points and move to $i + 1$ by inserting and deleting some slope-changing points.↵
↵
Sometimes, slope trick can also be an alternative solution to a greedy solution. The code will probably end up being the same as well, so sometimes slope trick can help you to find out the greedy solution instead. Personally, I find that slope trick is very helpful in this area as we do not have to proof the greedy since dp completely searches all possible states and is definitely correct.↵
↵
# Examples↵
↵
## [ARC123D — Inc, Dec — Decomposition](https://atcoder.jp/contests/arc123/tasks/arc123_d)↵
↵
#### Abridged Statement↵
↵
Given an array of $n$ numbers $a_1, a_2, \ldots, a_n$.↵
↵
You want to construct two arrays $b_1, b_2, \ldots, b_n$ and $c_1, c_2, \ldots, c_n$ that satisfies the following conditions↵
↵
* $a_i = b_i + c_i$ for all $1 \le i \le n$, ↵
* $b$ is non-decreasing, ↵
* $c$ is non-increasing↵
↵
Find the minimum possible cost of $\sum_{i=1}^n(|b_i| + |c_i|)$↵
↵
* $1 \le n \le 2 \cdot 10 ^ 5$↵
* $-10^8 \le a_i \le 10 ^ 8$↵
↵
#### Ideas↵
↵
We define $dp[i][j]$ as the minimum possible cost from $1$ to $i$ such that $b_i \le j$. By letting $b_i = k$ for each $k \le j$, we can come up with the following relation↵
↵
$dp[i][j] = \max_{k \le j} (dp[i - 1][k - \max(0, a_i - a_{i - 1})] + |k| + |a_i - k|)$↵
↵
The reason why we have $dp[i - 1][k - \max(0, a_i - a_{i - 1})]$ is to account for the non-increasing property of $c$. Let $k' = b_{i - 1}$ and $k = b_i$. Then, $c_{i - 1} = a_{i - 1} - k'$ and $c_i = a_i - k$. Since $c_{i -1} \ge c_i$, we have $a_{i - 1} - k' \ge a_i - k$, it simplifies to $k' \le k - (a_i - a_{i - 1})$.↵
↵
To make things simpler for us, we will first calculate↵
↵
$dp[i][j] = dp[i - 1][j - \max(0, a_i - a_{i - 1})] + |j| + |a_i - j|)$↵
↵
then take the prefix maximum to achieve the same result as the original dp.↵
↵
#### Solution↵
↵
Does the absolute signs remind you of [problem:713C]? If we plot the graph of $y = |x| + |a_i - x|$, we get:↵
↵
↵
↵
We observe that from $0$ to $a_i$, the line is horizontal at y coordinate of $a_i$ and on the left and right side of the horizontal line, the gradient is $-2$ and $2$ respectively. We can handle this easily by just inserting the slope-changing points into a priority queue.↵
↵
Next, we have to handle $dp[i - 1][j - \max(0, a_i - a_{i - 1})]$. This means that we just have to offset the graph of $dp[i - 1]$ by $\max(0, a_i - a_{i - 1})$ units to the right. To do this, we just store an extra variable `offset`which represents how much the original graph was shifted by.↵
↵
Now, in order to combine both the shifted $dp[i - 1]$ and the $|j| + |a_i - j|$, we store all the slope changing points in a priority queue, offset the points, and then insert extra slope changing points at $0$ and $a_i$. ↵
↵
To illustrate this, we will use the array $a=[1, -2, 3]$. To move from $dp[2]$ to $dp[3]$, we first shift the graph of $dp[2]$ by $5$ units to the right. Then, we add on $y = |x| + |5 - x|$, which is shown below as the blue line.↵
↵
![Transition from dp[2] to dp[3]](https://codeforces.com/predownloaded/59/a4/59a41c6725ea77eb89b756acb28b8d47c86d8258.png)↵
↵
For ease of implementation, observe that the slopes changes by 2 every time, so we can just let each point in the priority queue represent a change in 2 units of gradient.↵
↵
<spoiler summary="Code">↵
↵
```cpp↵
int main() {↵
int n; cin >> n;↵
vector<int> a(n);↵
for (int i = 0; i < n; i++) {↵
cin >> a[i];↵
}↵
// the offset in the x direction↵
long long offset = 0;↵
// the y coordinate at the point where the line is horizontal↵
long long ans = 0;↵
priority_queue<long long> pq;↵
for (int i = 0; i < n; i++) {↵
if (i > 0) {↵
offset += max(0, a[i] - a[i - 1]);↵
}↵
pq.push(-offset);↵
pq.push(a[i] - offset);↵
ans += abs(a[i]);↵
long long u = pq.top(); pq.pop();↵
ans += 2 * (u + offset - max(0, a[i]));↵
}↵
cout << ans << '\n';↵
return 0;↵
}↵
```↵
↵
</spoiler>↵
↵
## Frisbee↵
(problem is from local judge so I will not attach the link to the question)↵
↵
#### Abridged Statement↵
↵
You are currently standing at point $(0, 0)$ of a grid. There are $n$ special points on the grid, each point being $(x_i, y_i)$. For each time $t$ from $1$ to $n$, you have to do one of the following:↵
↵
1. Move to any point with the same x-coordinate as point $t$. In other words, you have to move to a point $(x_t, a)$ where $a$ is any integer that you can choose.↵
2. Move to any point with the same y-coordinate as point $t$. In other words, you have to move to a point $(a, y_t)$ where $a$ is any integer that you can choose.↵
↵
Find the minimum possible manhattan distance that you travel after time $n$.↵
↵
* $1 \le n \le 2\cdot 10^5$↵
* $-10^9 \le x_i, y_i \le 10^9$↵
↵
#### Ideas↵
↵
The first obvious observation is that there is no point moving in both x and y direction in 1 unit of time. In other words, if for time $i$ we decide to choose option 1 and we are currently at point $(a, b)$, we will move to point $(x_i, b)$ which will increase our total distance by $|x_i - a|$.↵
↵
This will allow us to come up with a very simple dp. We have 2 dp functions $xdp[i][j]$ and $ydp[i][j]$ where $xdp[i][j]$ represents the minimum distance travelled to reach points from $1$ to $i$ and ending up at point $(x_i, j)$, while $ydp[i][j]$ represents the same thing but ending up at $(j, y_i)$. You can think of it as $xdp$ stores the answers for ending with operation 1 while $ydp$ stores the answer for operation 2. ↵
↵
Then, we can come up with the recurrence, ↵
$xdp[i][j] = \min(xdp[i - 1][j] + |x_{i - 1} - x_i|, ydp[i - 1][x_i] + |y_{i - 1} - j|)$↵
The first term is from simply doing operation 1 twice in a row, while the second term is from doing operation 2 in the $i - 1$ step and then doing operation 1. We can easily come up with something similar for $ydp$ but I will leave it as an exercise for the reader.↵
↵
#### Solution↵
↵
Since $j$ can go up to $10^9$, it obviously will not work. This is where the slope trick comes in. The first term is very easy to handle as it is just increasing $xdp$ by a constant. So if we have a graph of $xdp[i][j]$ against $j$, we are just shifting the graph upwards. The second function is also quite simple as it is just the absolute function ($y = |x - c|$) shifted upwards by another constant.↵
↵
To store the graph, we simply store the set of points which forms the valleys (the red crosses in the diagram below). Then, in order to transition to the next states, we just have to do some `lower_bound` on the sets and erase some points from the sets.↵
↵
![Cases for transition from dp[i — 1] to dp[i]](https://codeforces.com/predownloaded/86/76/86764a4dc225d0e6fae6502ac60dc4eb2d405433.png)↵
↵
Make sure to only maintain the set of points which are the minimum. As you can see in case 2, the blue point that is added ended up to be useless as it is not the minimum, so we have to take care to not add it to the set. Furthermore, in case 1, we have to remove all the points that ends up being useless after the addition of the blue point. Take note that the removed points forms a continuous segment in the set.↵
↵
<spoiler summary="Code">↵
↵
```cpp↵
const long long INF = 1000000000000000005;↵
↵
int n;↵
int p[1000005][2];↵
set<pair<int, long long>> st[2];↵
long long off[2];↵
long long ans;↵
↵
// finds the value of xdp[i][v] if z is 0 and ydp otherwise↵
inline long long getMin(int z, long long v) {↵
auto ub = st[z].upper_bound({v, INF});↵
long long mn = INF;↵
if (ub != st[z].end()) {↵
mn = min(mn, ub -> second + ub -> first - v);↵
}↵
if (ub != st[z].begin()) {↵
ub = prev(ub);↵
mn = min(mn, ub -> second + v - ub -> first);↵
}↵
return mn + off[z];↵
}↵
↵
int main() {↵
ios::sync_with_stdio(0), cin.tie(0);↵
cin >> n;↵
for (int i = 0; i < n; i++) {↵
cin >> p[i][0] >> p[i][1];↵
}↵
// st[0] stores minimum distance to reach points with same x-coordinate↵
// while st[1] stores the same for y-coordinate↵
for (int z = 0; z < 2; z++) {↵
st[z].insert({0, abs(p[0][z])});↵
}↵
for (int i = 1; i < n; i++) {↵
pair<int, long long> np[2];↵
for (int z = 0; z < 2; z++) {↵
long long mn = getMin(z ^ 1, p[i][z]);↵
// np is the new point that we need to add based on the second term↵
// (the blue point in the diagram)↵
np[z] = {p[i - 1][z ^ 1], mn};↵
}↵
for (int z = 0; z < 2; z++) {↵
// offset upwards for first term of recurrence relation↵
off[z] += abs(p[i][z] - p[i - 1][z]);↵
long long mn = getMin(z, np[z].first);↵
// only add the point when it is useful (case 1)↵
if (np[z].second < mn) {↵
np[z].second -= off[z];↵
auto ub = st[z].upper_bound({np[z].first, INF});↵
// delete all the useless points↵
while (ub != st[z].end() && ub -> first - np[z].first↵
+ np[z].second <= ub -> second) {↵
ub = st[z].erase(ub);↵
}↵
while (ub != st[z].begin() && np[z].first - prev(ub) -> first↵
+ np[z].second <= prev(ub) -> second) {↵
st[z].erase(prev(ub));↵
}↵
st[z].insert(np[z]);↵
}↵
}↵
}↵
ans = INF;↵
for (int z = 0; z < 2; z++) {↵
for (auto [a, v] : st[z]) {↵
ans = min(ans, v + off[z]);↵
}↵
}↵
cout << ans << '\n';↵
return 0;↵
}↵
```↵
↵
</spoiler>↵
↵
# Convex Convolution↵
↵
There are actually 2 different kinds of slopes tricks. The first type as you've seen in the previous examples is the slope tricks where we store the points where the gradient of the slope changes.↵
↵
However, there is another type of slope trick where instead of storing points where the gradient of the slope changes, we instead store the gradients of the slope itself.↵
↵
We will call a **gradient representation** of an array the tuple of the first element of the array and its gradients (or differences,, I'm using them interchangably). For example, in the array $A=[1,2,6,14]$, its gradient representation is $(A[0],D_A)=(1,[2-1,6-2,14-6])=(1,[1,4,8])$. (We will use $0$-indexing here).↵
↵
An array is called convex if "it looks like a smiley face", or its gradient is non-decreasing. If we look at the gradient representation of such an array, its gradients are non-decreasing.↵
↵
Now, what's so special about these convex arrays is that we can perform the following operations quickly: Given $2$ convex arrays $A$ and $B$, find the array $C$ given by $C_k = \min\limits_{i+j=k} A_i+B_j$.↵
↵
Surprisingly, we can find $C$ in $O(n)$.↵
↵
Claim: $D_C$ is the concatenation of $D_A$ and $D_B$ in the sorted order.↵
↵
Notice that $A[i] = A[0]+D_A[0]+D_A[1]+\ldots+D_A[i-1]$. Since $D_A$ is sorted by definition, $D_A[0]+D_A[1]+\ldots+D_A[i-1]$ is the sum of the $i$ smallest elements in $D_A$.↵
↵
Let's expand $A_i+B_j$ in this definition. $A_i+B_j = A_0+B_0 + (i \text{ smallest elements in }A) + (j \text{ smallest elements in }B)$.↵
↵
If we imagine $D$ as the concatenation of $D_A$ and $D_B$ in the sorted order, then we can imagine $C_k$ as picking the best $k$ elements in $D$ such that it follows the constraints that $i$ of those elements came from $A$ and $j$ of them came from $B$. No matter how you pick $i$ elements from $A$ and $j$ elements from $B$, you will end up picking $i+j$ elements from $D$ in total.↵
↵
Now, we want to minimize the sum of the $k$ elements we pick from $D$. The obvious thing to try is to pick the first $k$ elements from $D$, since we have already sorted $D$. This works because those elements came from a prefix of $D_A$ and a prefix of $D_B$. ↵
↵
Let's use $A=[1,2,6,14]$ and $B=[1,3,5,8,20]$ as examples. ↵
↵
↵
↵
The balls represent the difference array of $A$ and $B$, respectively colored in red and blue.↵
↵
↵
↵
And here is the array $D$. You can see that picking any prefix of $D$ corresponds to picking some prefix from $D_A$ and $D_B$.↵
↵
We can see that $D_C=D$ actually. Furthermore, a nice thing you want to realize about this is that if $A_i+B_j$ obtains the minimum value for $C_k$, then either $A_{i+1}+B_j$ or $A_i+B_{j+1}$ obtains the minimum value for $C_{k+1}$. This is because $C_{k+1}-C_k$ corresponds to a ball. If the ball is red, it corresponds to $A_{i+1}$, otherwise, it corresponds to $B_{j+1}$.↵
↵
Corollary: $C$ is also convex. The difference array of $C$ is non-decreasing.↵
↵
There is also concave convolution, in which we have convolution of the form $C_k = \max\limits_{i+j=k} A_i+B_j$. We solve this quickly when $A$ and $B$ are concave, that is their difference arrays are non-deincreasing.↵
↵
## Merchant Otter↵
(problem is from local judge so I will not attach the link to the question)↵
↵
#### Abridged Statement↵
↵
Merchant otter knows the prices of stock for the next $N$ days. Namely, she knows that you can sell stock for $S_i$ yen on the $i$-th day and you can buy stock for $B_i$ yen on the $i$-th day. Obviously, $s_i \leq b_i$.↵
↵
Merchant otter starts with $0$ stock in the beginning. Everyday she can buy at most $1$ stock and sell at most $1$ stock. For some reason, the amount of stock she has must be in the range $[-K,K]$ at all times. Find the maximum profit she can have after $N$ days.↵
↵
* $1 \leq K \leq N \leq 10^6$↵
* $0 \leq s_i \leq b_i \leq 10^9$↵
↵
#### Solution↵
↵
Let $dp[i][j]$ be the maximum profit we have if on the end of the $i$-th day we have $j$ shares. Let's pretend that the constraint that the stocks must be in the range $[-K,K]$ does not exist for a while.↵
↵
We have the following transition $dp[i][j]=\max(dp[i-1][j-+1]+s-b_i,\ dp[i-1][j],\ dp[i-1][j+-1]-b+s_i)$. ↵
↵
This is almost concave convolution! Let's have $A[j]=[s-b_i,0,-bs_i]$, $B[j]=dp[i-1][j]$, $C[j]=dp[i][j-1]$. ↵
↵
Then our transition is of the form $C_k = \max\limits_{i+j=k} A_i+B_j$. When we are performing many concave convolutions, it is usually better to store the array in its **gradient form**. Then, assuming we have $B_0$ and $D_B$, we can obtain $C_0$ and $D_C$ quickly via the following:↵
↵
* $C_0 \gets B_0 + s_i$↵
* $D_C \gets sort(D_B + [-s_i,-b_i])$↵
↵
Great, we are almost done, we just need to add the additional constraint that the number of stocks we have must be in the range $[-K,K]$. The only thing we have to do here is possibly delete the first and last element of $C$ where we only store $C_0$ and $D_C$.↵
↵
Deleting the last element of $C$ is easy, just delete the last element from $D_C$. To delete the first element of $C$, first update $C_0 \gets C_0 + D_C[0]$, the delete the first element from $D_C$.↵
↵
Overall, the code becomes very short.↵
↵
<spoiler summary="Code">↵
↵
```cpp↵
#include <bits/stdc++.h>↵
using namespace std;↵
↵
int n,k;↵
multiset<int,greater<int> > s; //non-decreasing order↵
↵
int main(){↵
cin>>n>>k;↵
↵
int B,S;↵
long long ans=0;↵
for (int x=0;x<n;x++){↵
cin>>B>>S;↵
s.insert(-B),s.insert(-S);↵
↵
ans+=S;↵
if (x>=k){ //delete the first and last elements↵
ans+=(*s.begin());↵
s.erase(s.begin());↵
s.erase(--s.end());↵
}↵
}↵
↵
for (int x=0;x<min(n,k);x++){↵
ans+=(*s.begin());↵
s.erase(s.begin());↵
}↵
↵
cout<<ans<<endl;↵
}↵
```↵
↵
</spoiler>↵
↵
## [Social Distancing](https://nus.kattis.com/problems/socialdistancing)↵
↵
#### Abridged Statement↵
↵
You are given a array of $n$ numbers $a_1,a_2,\ldots,a_n$. You want to select a permutation $p_1,p_2,\ldots,p_n$ of size $n$ such that the following cost $\sum\limits_{i=1}^{n-1} a_{\max(p_i, p_{i+1})}$ is minimized. Find the minimum possible cost.↵
↵
* $1 \le n \le 3 \cdot 10 ^ 5$↵
* $1 \le a_i \le 10 ^ 9$↵
↵
#### Ideas↵
↵
We can iterate from $i=1$ to $i=n$ and pick which position to put $i$. If you put $a_i$ directly adjacent to two earlier elements, it will contribute to a cost of $2a_i$. If you put it adjacent to one, it will contribute to a cost of $a_i$. Otherwise, if you put it by itself, it will not contribute to the cost.↵
↵
For example, for the array $a = [1, 3, 5]$, we first place $a_1$ by itself as there is nothing else placed yet. Then, we can put $a_2$ by itself as well and finally we put $a_3$ in the middle of both of them, contributing to a cost of $10$. However, we can achieve a cost of 8 by putting $a_2$ next to $a_1$, contributing to a cost of $3$ and finally putting $a_3$ next to $a_2$, contributing to a cost of $5$.↵
↵
We can think of the operations as the following. Combining two connected components incur a cost of $2a_i$, doing nothing incurs a cost of $a_i$, and adding a connected component is free. Hence, we can come up with the following dp. ↵
↵
$dp[i][j] = \min(dp[i - 1][j + 1] + 2a_i,\ dp[i - 1][j] + a_i,\ dp[i - 1][j - 1])$↵
↵
Using the same array $a = [1, 3, 5]$, we have the following dp table where the cell in the $i$-th row and $j$-th column represent $dp[i][j]$.↵
↵
| i\j | 1 | 2 | 3 |↵
|:-----:|:---------------:|:---------------:|:---------------:|↵
| 1 | 0 | $\infty$ | $\infty$ |↵
| 2 | 3 | 0 | $\infty$ |↵
| 3 | 8 | 3 | 0 |↵
↵
#### Solution↵
↵
(Let us pretend that we do not know what convex convolution is so that we can see intuitively why convex convolution works)↵
↵
From the dp function, we can see that $dp[i]$ is just made up of 3 different copies of $dp[i - 1]$ shifted in different directions. This is often how slope trick looks like. Let us draw some graphs to see how the dp changes from $i - 1$ to $i$.↵
↵
![Image of dp[1], dp[2] and dp[3]](https://codeforces.com/predownloaded/9d/31/9d31e4143bb09301538f7b7491a4694f05650908.png)↵
↵
<img src="https://codeforces.com/predownloaded/d7/d3/d7d359a460292b4487c85323f89abd3a29d07b1b.png" alt="Image of dp[2] pasted 3 times to form dp[3]" width="50%" style="float: left"/> ↵
↵
Let us see how we can obtain the graph of $dp[i]$ from $dp[i - 1]$. From the recurrence relation, we can see that $dp[i]$ is obtained by taking the minimum of the following 3 graphs: $dp[i - 1]$ shifted 1 to the right, $dp[i - 1]$ shifted $a_i$ upwards, and $dp[i - 1]$ shifted 1 to the left and $2a_i$ upwards.↵
↵
As you can see in the image to the right, $dp[3]$ (shown in blue lines) can be formed by duplicating $dp[2]$ (shown in dotted lines) 3 times. Furthermore, the gradients of the resulting graph seems to be related to $a_i$.↵
↵
</br>↵
↵
Let us see how the dp function changes for a more complicated function. For this purpose, we will use the array $a = [1, 5, 5, 3, 6, 4]$. Supposed we have already calculated $dp[5]$ (shown in dotted lines) and want to calculate $dp[6]$.↵
↵
![Image of dp[5] to dp[6]](https://codeforces.com/predownloaded/51/b2/51b2dd0b5573c41dca5414f0a6080e0d8a015a88.png)↵
↵
Note that the crosses are colour coded according to which $j$ it came from ($dp[5][1]$ is cyan, $dp[5][2]$ is green, $dp[5][3]$ is blue, $dp[5][4]$ is magenta, and $dp[5][5]$ is brown). We can see that as we compare the 3 overlapping graphs, the point where one graph starts to become the minimum is when the gradient becomes larger than $a_i$ (in this case $a_6 = 4$). Why is that so?↵
↵
If we only compare the red and black line, we see that the difference between a point on the red line and the same coloured point on the black line (it is one spot to the left) always has a difference of $a_i$. This is because same coloured points comes from the same $dp[i - 1][j]$ and only differ from shifting upwards by $a_i$. ↵
↵
Hence, when we look from right to left, while the gradient of the red line is less than $a_i$, the red line is always optimal as the difference between two adjacent points on the red line is equal to the gradient while the difference between the adjacent points on the black line and red line is equal to $a_i$. The moment $a_i$ becomes smaller than the gradient, the black line becomes more optimal instead, and when we switch from the black line to red line, the new gradient in between the two lines is $a_i$ (see the blue points on the right graph).↵
↵
Hence, if we store the gradients of $dp[i - 1]$ in a priority queue, all we need to do to transition to $dp[i]$ is to insert $a_i$ two times. However, since we do not want $dp[i][0]$, we can just pop out the largest gradient which represents $dp[i][0]$. Then after we are done processing $dp[n]$, the answer is just the sum of the gradients in the priority queue.↵
↵
<spoiler summary="Code">↵
↵
```cpp↵
int main() {↵
int n; cin >> n;↵
vector<int> a(n);↵
for (int i = 0; i < n; i++) {↵
cin >> a[i];↵
}↵
priority_queue<long long> pq;↵
for (int i = 1; i < n; i++) {↵
pq.push(a[i]);↵
pq.push(a[i]);↵
pq.pop();↵
}↵
long long ans = 0;↵
while (!pq.empty()) {↵
ans += pq.top(); pq.pop();↵
}↵
cout << ans << '\n';↵
return 0;↵
}↵
```↵
↵
</spoiler>↵
↵
Note that what we are doing is actually just convex convolution with $A[j]=[2a_i,a_i,0]$, $B[j]=dp[i-1][j]$, $C[j]=dp[i][j-1]$. ↵
↵
## [RMI21 — Paths](https://oj.uz/problem/view/RMI21_paths)↵
↵
#### Abridged Statement (Modified)↵
↵
You have a tree of $n$ vertices. The weight of the $i$-th edge is equal to $c_i$. You want to select $k$ vertices such that the sum of the weights of all edges that lie on the path of vertex $1$ to any one of the $k$ vertices is maximised. Find the maximum possible sum.↵
↵
* $1 \le k \le n \le 10^5$↵
* $0 \le c_i \le 10^9$↵
↵
#### Ideas↵
↵
It is obvious that we will only select the leaf nodes as they will cover all their parent nodes as well. We can come up with a $O(nk)$ dp solution easily. For each vertex $u$, let $dp[u][j]$ be the answer for the subtree of $u$ while selecting $j$ vertices.↵
↵
For leaf vertices, we have $dp[u][0] = 0$. When we have multiple edges, we have a knapsack-like transition. For every edge $u \rightarrow v$ where $u$ is the parent of $v$ and the edge weight is $c$, $dp[u][j] = \max_{k \le j} dp[u][j - k] + dp[v][k] + [k > 0] \cdot c$. What this dp is doing is that if you choose at least one leaf in the subtree of $v$ (represented by boolean $[k > 0]$), then cost $c$ will be included in the final sum. Then, the remaining $j - k$ selected vertices can go to the other edges in the subtree of $u$.↵
↵
As a side note, the whole dp works in ammortised $O(nk)$ due to distribution dp. If you do not know what it is you can check [this comment](https://codeforces.com/blog/entry/100910?#comment-896003).↵
↵
#### Solution↵
↵
Of course, we will plot our dp function on a graph again. Suppose we have the following tree↵
↵
↵
↵
Let us see how we can obtain $dp[1]$. First, we have to increase all $dp[v][j]$ by $c_{u, v}$ for all $j \ge 1$. We see that this operation is just increasing the first gradient by $c_{u, v}$.↵
↵
![Graph of dp[2] and dp[3]](https://codeforces.com/predownloaded/f4/21/f42148c63ca369a4073fdd00042971b3f65e45cf.png)↵
↵
To combine the two graphs, we realise that we are actually just combining the gradients of both graphs in decreasing order. In the diagram below, the blue lines represent the lines from $dp[2]$ and the orange lines represent the lines from $dp[3]$.↵
↵
![Graph of dp[1]](https://codeforces.com/predownloaded/5f/26/5f26545782ba8299431b1ce8b4445c3b8e761cd9.png)↵
↵
To implement this, we simply store a priority queue of the gradients at every vertex, then do small to large merging to calculate the new gradients for its parent.↵
↵
Do note that this is actually just convex convolution but I illustrated it with diagrams to hopefully make convex convolution clearer.↵
↵
<spoiler summary="Code">↵
↵
```cpp↵
const int MAXN = 100005;↵
↵
int n, k;↵
vector<pair<int, int>> adj[MAXN];↵
↵
priority_queue<long long> dp[MAXN];↵
void dfs(int u, int p) {↵
while (!dp[u].empty()) {↵
dp[u].pop();↵
}↵
for (auto [v, w] : adj[u]) {↵
if (v == p) continue;↵
dfs(v, u);↵
long long x = dp[v].top(); dp[v].pop();↵
dp[v].push(x + w);↵
if (dp[u].size() < dp[v].size()) {↵
swap(dp[u], dp[v]);↵
}↵
while (!dp[v].empty()) {↵
long long x = dp[v].top(); dp[v].pop();↵
dp[u].push(x);↵
}↵
}↵
if (dp[u].empty()) {↵
dp[u].push(0);↵
}↵
}↵
↵
int main() {↵
cin >> n >> k;↵
for (int i = 1; i < n; i++) {↵
int a, b, c; cin >> a >> b >> c;↵
adj[a].push_back({b, c});↵
adj[b].push_back({a, c});↵
}↵
dfs(1, -1);↵
long long ans = 0;↵
while (!dp[1].empty() && k--) {↵
long long x = dp[1].top(); dp[1].pop();↵
ans += x;↵
}↵
cout << ans << '\n';↵
return 0;↵
}↵
```↵
↵
</spoiler>↵
↵
#### Greedy Observation↵
↵
Stare at the above code for a few seconds... Do you see the greedy that the code is effectively doing?↵
↵
We are effectively assigning each edge $u \rightarrow v$ to the leaf which is the furthest distance from $v$, and then choosing the largest $k$ leaves at the end.↵
↵
↵
↵
As we can see in the above diagram, edge $1 \rightarrow 3$ belongs to leaf $8$ as the distance from $3$ to $8$ is larger than the distance from $3$ to $7$. The same argument can be used for $1 \rightarrow 2$.↵
↵
After assigning all the edges to the leaves, leaf $4$ has weight $3$, leaf $5$ has weight $1$, leaf $8$ has weight $4$, and leaf $7$ has weight $2$. So we simply select the $k$ largest weights and that will be our answer.↵
↵
With this greedy observation, we can come up with an even simpler code which is faster as it does not require set merging. We can just keep a global set containing the weights of the leaves, and store an extra array $mx[u]$ containing the leaf with the maximum weight in the subtree of $u$.↵
↵
<spoiler summary="Code">↵
↵
```cpp↵
const int MAXN = 100005;↵
↵
int n, k;↵
vector<pair<int, int>> adj[MAXN];↵
↵
multiset<long long> st;↵
long long mx[MAXN];↵
void dfs(int u, int p) {↵
mx[u] = 0;↵
bool leaf = 1;↵
for (auto [v, w] : adj[u]) {↵
if (v == p) continue;↵
leaf = 0;↵
dfs(v, u);↵
st.erase(st.find(mx[v]));↵
st.insert(mx[v] + w);↵
mx[u] = max(mx[u], mx[v] + w);↵
}↵
if (leaf) {↵
st.insert(0);↵
}↵
}↵
↵
int main() {↵
cin >> n >> k;↵
for (int i = 1; i < n; i++) {↵
int a, b, c; cin >> a >> b >> c;↵
adj[a].push_back({b, c});↵
adj[b].push_back({a, c});↵
}↵
dfs(1, -1);↵
long long ans = 0;↵
while (st.size() > k) {↵
st.erase(st.begin());↵
}↵
for (long long x : st) {↵
ans += x;↵
}↵
cout << ans << '\n';↵
return 0;↵
}↵
```↵
↵
</spoiler>↵
↵
You might be thinking, we already solved this problem, what's the point of the greedy observation?? Well... I tricked you and there is more to the problem.↵
↵
#### Abridged Statement (Original)↵
↵
You have a tree of $n$ vertices. The weight of the $i$-th edge is equal to $c_i$. **For each root $\boldsymbol{r}$**, you want to select $k$ vertices such that the sum of the weights of all edges that lie on the path of **vertex $\boldsymbol{r}$** to any one of the $k$ vertices is maximised. Find the maximum possible sum **for each root $\boldsymbol{r}$**.↵
↵
#### Solution↵
↵
The final solution is a lot easier using the greedy observation. Since we want the answer for each root, we can simply do rerooting dp, maintaining 2 sets, one containing the largest $k$ elements and the other containing the remaining elements. We can easily update the sets, sums, and max while rerooting.↵
↵
Since this is a slope trick blog, I will not cover the rerooting dp. You can read my code [here](https://oj.uz/submission/537654) to try to figure it out yourself if you are curious.
↵
As mentioned in my previous blog, I will be writing a tutorial about slope trick. Since there are already many blogs that goes through the concept of slope trick, my blog will focus more on the intuition behind coming up with the slope trick algorithm. ↵
↵
Hence, if you do not know slope trick yet, I suggest that you read other slope trick blogs such as https://codeforces.com/blog/entry/47821 and https://codeforces.com/blog/entry/77298 before reading my blog. In the future explanation on the example problems, I will assume that the reader already knows the big idea behind slope trick but do not know how to motivate the solution.↵
↵
Great thanks to [user:errorgorn,2022-06-25] for proofreading and writing the section on convex convolution and merchant otter.↵
↵
# When to use slope trick?↵
↵
Most of the time, slope trick can be used to optimise dp functions in the form of $dp_{i, j} = \min(dp_{i - 1, j - 1}, dp_{i - 1, j} + A_i)$ or dp functions containing costs with absolute values. In this kind of dp functions, the graph of the dp function where the x-axis is $j$ and y-axis is $dp_{i, j}$ changes predictably from $i$ to $i + 1$ which allows us to store the slope-changing points and move to $i + 1$ by inserting and deleting some slope-changing points.↵
↵
Sometimes, slope trick can also be an alternative solution to a greedy solution. The code will probably end up being the same as well, so sometimes slope trick can help you to find out the greedy solution instead. Personally, I find that slope trick is very helpful in this area as we do not have to proof the greedy since dp completely searches all possible states and is definitely correct.↵
↵
# Examples↵
↵
## [ARC123D — Inc, Dec — Decomposition](https://atcoder.jp/contests/arc123/tasks/arc123_d)↵
↵
#### Abridged Statement↵
↵
Given an array of $n$ numbers $a_1, a_2, \ldots, a_n$.↵
↵
You want to construct two arrays $b_1, b_2, \ldots, b_n$ and $c_1, c_2, \ldots, c_n$ that satisfies the following conditions↵
↵
* $a_i = b_i + c_i$ for all $1 \le i \le n$, ↵
* $b$ is non-decreasing, ↵
* $c$ is non-increasing↵
↵
Find the minimum possible cost of $\sum_{i=1}^n(|b_i| + |c_i|)$↵
↵
* $1 \le n \le 2 \cdot 10 ^ 5$↵
* $-10^8 \le a_i \le 10 ^ 8$↵
↵
#### Ideas↵
↵
We define $dp[i][j]$ as the minimum possible cost from $1$ to $i$ such that $b_i \le j$. By letting $b_i = k$ for each $k \le j$, we can come up with the following relation↵
↵
$dp[i][j] = \max_{k \le j} (dp[i - 1][k - \max(0, a_i - a_{i - 1})] + |k| + |a_i - k|)$↵
↵
The reason why we have $dp[i - 1][k - \max(0, a_i - a_{i - 1})]$ is to account for the non-increasing property of $c$. Let $k' = b_{i - 1}$ and $k = b_i$. Then, $c_{i - 1} = a_{i - 1} - k'$ and $c_i = a_i - k$. Since $c_{i -1} \ge c_i$, we have $a_{i - 1} - k' \ge a_i - k$, it simplifies to $k' \le k - (a_i - a_{i - 1})$.↵
↵
To make things simpler for us, we will first calculate↵
↵
$dp[i][j] = dp[i - 1][j - \max(0, a_i - a_{i - 1})] + |j| + |a_i - j|)$↵
↵
then take the prefix maximum to achieve the same result as the original dp.↵
↵
#### Solution↵
↵
Does the absolute signs remind you of [problem:713C]? If we plot the graph of $y = |x| + |a_i - x|$, we get:↵
↵
↵
↵
We observe that from $0$ to $a_i$, the line is horizontal at y coordinate of $a_i$ and on the left and right side of the horizontal line, the gradient is $-2$ and $2$ respectively. We can handle this easily by just inserting the slope-changing points into a priority queue.↵
↵
Next, we have to handle $dp[i - 1][j - \max(0, a_i - a_{i - 1})]$. This means that we just have to offset the graph of $dp[i - 1]$ by $\max(0, a_i - a_{i - 1})$ units to the right. To do this, we just store an extra variable `offset`which represents how much the original graph was shifted by.↵
↵
Now, in order to combine both the shifted $dp[i - 1]$ and the $|j| + |a_i - j|$, we store all the slope changing points in a priority queue, offset the points, and then insert extra slope changing points at $0$ and $a_i$. ↵
↵
To illustrate this, we will use the array $a=[1, -2, 3]$. To move from $dp[2]$ to $dp[3]$, we first shift the graph of $dp[2]$ by $5$ units to the right. Then, we add on $y = |x| + |5 - x|$, which is shown below as the blue line.↵
↵
![Transition from dp[2] to dp[3]](https://codeforces.com/predownloaded/59/a4/59a41c6725ea77eb89b756acb28b8d47c86d8258.png)↵
↵
For ease of implementation, observe that the slopes changes by 2 every time, so we can just let each point in the priority queue represent a change in 2 units of gradient.↵
↵
<spoiler summary="Code">↵
↵
```cpp↵
int main() {↵
int n; cin >> n;↵
vector<int> a(n);↵
for (int i = 0; i < n; i++) {↵
cin >> a[i];↵
}↵
// the offset in the x direction↵
long long offset = 0;↵
// the y coordinate at the point where the line is horizontal↵
long long ans = 0;↵
priority_queue<long long> pq;↵
for (int i = 0; i < n; i++) {↵
if (i > 0) {↵
offset += max(0, a[i] - a[i - 1]);↵
}↵
pq.push(-offset);↵
pq.push(a[i] - offset);↵
ans += abs(a[i]);↵
long long u = pq.top(); pq.pop();↵
ans += 2 * (u + offset - max(0, a[i]));↵
}↵
cout << ans << '\n';↵
return 0;↵
}↵
```↵
↵
</spoiler>↵
↵
## Frisbee↵
(problem is from local judge so I will not attach the link to the question)↵
↵
#### Abridged Statement↵
↵
You are currently standing at point $(0, 0)$ of a grid. There are $n$ special points on the grid, each point being $(x_i, y_i)$. For each time $t$ from $1$ to $n$, you have to do one of the following:↵
↵
1. Move to any point with the same x-coordinate as point $t$. In other words, you have to move to a point $(x_t, a)$ where $a$ is any integer that you can choose.↵
2. Move to any point with the same y-coordinate as point $t$. In other words, you have to move to a point $(a, y_t)$ where $a$ is any integer that you can choose.↵
↵
Find the minimum possible manhattan distance that you travel after time $n$.↵
↵
* $1 \le n \le 2\cdot 10^5$↵
* $-10^9 \le x_i, y_i \le 10^9$↵
↵
#### Ideas↵
↵
The first obvious observation is that there is no point moving in both x and y direction in 1 unit of time. In other words, if for time $i$ we decide to choose option 1 and we are currently at point $(a, b)$, we will move to point $(x_i, b)$ which will increase our total distance by $|x_i - a|$.↵
↵
This will allow us to come up with a very simple dp. We have 2 dp functions $xdp[i][j]$ and $ydp[i][j]$ where $xdp[i][j]$ represents the minimum distance travelled to reach points from $1$ to $i$ and ending up at point $(x_i, j)$, while $ydp[i][j]$ represents the same thing but ending up at $(j, y_i)$. You can think of it as $xdp$ stores the answers for ending with operation 1 while $ydp$ stores the answer for operation 2. ↵
↵
Then, we can come up with the recurrence, ↵
$xdp[i][j] = \min(xdp[i - 1][j] + |x_{i - 1} - x_i|, ydp[i - 1][x_i] + |y_{i - 1} - j|)$↵
The first term is from simply doing operation 1 twice in a row, while the second term is from doing operation 2 in the $i - 1$ step and then doing operation 1. We can easily come up with something similar for $ydp$ but I will leave it as an exercise for the reader.↵
↵
#### Solution↵
↵
Since $j$ can go up to $10^9$, it obviously will not work. This is where the slope trick comes in. The first term is very easy to handle as it is just increasing $xdp$ by a constant. So if we have a graph of $xdp[i][j]$ against $j$, we are just shifting the graph upwards. The second function is also quite simple as it is just the absolute function ($y = |x - c|$) shifted upwards by another constant.↵
↵
To store the graph, we simply store the set of points which forms the valleys (the red crosses in the diagram below). Then, in order to transition to the next states, we just have to do some `lower_bound` on the sets and erase some points from the sets.↵
↵
![Cases for transition from dp[i — 1] to dp[i]](https://codeforces.com/predownloaded/86/76/86764a4dc225d0e6fae6502ac60dc4eb2d405433.png)↵
↵
Make sure to only maintain the set of points which are the minimum. As you can see in case 2, the blue point that is added ended up to be useless as it is not the minimum, so we have to take care to not add it to the set. Furthermore, in case 1, we have to remove all the points that ends up being useless after the addition of the blue point. Take note that the removed points forms a continuous segment in the set.↵
↵
<spoiler summary="Code">↵
↵
```cpp↵
const long long INF = 1000000000000000005;↵
↵
int n;↵
int p[1000005][2];↵
set<pair<int, long long>> st[2];↵
long long off[2];↵
long long ans;↵
↵
// finds the value of xdp[i][v] if z is 0 and ydp otherwise↵
inline long long getMin(int z, long long v) {↵
auto ub = st[z].upper_bound({v, INF});↵
long long mn = INF;↵
if (ub != st[z].end()) {↵
mn = min(mn, ub -> second + ub -> first - v);↵
}↵
if (ub != st[z].begin()) {↵
ub = prev(ub);↵
mn = min(mn, ub -> second + v - ub -> first);↵
}↵
return mn + off[z];↵
}↵
↵
int main() {↵
ios::sync_with_stdio(0), cin.tie(0);↵
cin >> n;↵
for (int i = 0; i < n; i++) {↵
cin >> p[i][0] >> p[i][1];↵
}↵
// st[0] stores minimum distance to reach points with same x-coordinate↵
// while st[1] stores the same for y-coordinate↵
for (int z = 0; z < 2; z++) {↵
st[z].insert({0, abs(p[0][z])});↵
}↵
for (int i = 1; i < n; i++) {↵
pair<int, long long> np[2];↵
for (int z = 0; z < 2; z++) {↵
long long mn = getMin(z ^ 1, p[i][z]);↵
// np is the new point that we need to add based on the second term↵
// (the blue point in the diagram)↵
np[z] = {p[i - 1][z ^ 1], mn};↵
}↵
for (int z = 0; z < 2; z++) {↵
// offset upwards for first term of recurrence relation↵
off[z] += abs(p[i][z] - p[i - 1][z]);↵
long long mn = getMin(z, np[z].first);↵
// only add the point when it is useful (case 1)↵
if (np[z].second < mn) {↵
np[z].second -= off[z];↵
auto ub = st[z].upper_bound({np[z].first, INF});↵
// delete all the useless points↵
while (ub != st[z].end() && ub -> first - np[z].first↵
+ np[z].second <= ub -> second) {↵
ub = st[z].erase(ub);↵
}↵
while (ub != st[z].begin() && np[z].first - prev(ub) -> first↵
+ np[z].second <= prev(ub) -> second) {↵
st[z].erase(prev(ub));↵
}↵
st[z].insert(np[z]);↵
}↵
}↵
}↵
ans = INF;↵
for (int z = 0; z < 2; z++) {↵
for (auto [a, v] : st[z]) {↵
ans = min(ans, v + off[z]);↵
}↵
}↵
cout << ans << '\n';↵
return 0;↵
}↵
```↵
↵
</spoiler>↵
↵
# Convex Convolution↵
↵
There are actually 2 different kinds of slopes tricks. The first type as you've seen in the previous examples is the slope tricks where we store the points where the gradient of the slope changes.↵
↵
However, there is another type of slope trick where instead of storing points where the gradient of the slope changes, we instead store the gradients of the slope itself.↵
↵
We will call a **gradient representation** of an array the tuple of the first element of the array and its gradients (or differences,, I'm using them interchangably). For example, in the array $A=[1,2,6,14]$, its gradient representation is $(A[0],D_A)=(1,[2-1,6-2,14-6])=(1,[1,4,8])$. (We will use $0$-indexing here).↵
↵
An array is called convex if "it looks like a smiley face", or its gradient is non-decreasing. If we look at the gradient representation of such an array, its gradients are non-decreasing.↵
↵
Now, what's so special about these convex arrays is that we can perform the following operations quickly: Given $2$ convex arrays $A$ and $B$, find the array $C$ given by $C_k = \min\limits_{i+j=k} A_i+B_j$.↵
↵
Surprisingly, we can find $C$ in $O(n)$.↵
↵
Claim: $D_C$ is the concatenation of $D_A$ and $D_B$ in the sorted order.↵
↵
Notice that $A[i] = A[0]+D_A[0]+D_A[1]+\ldots+D_A[i-1]$. Since $D_A$ is sorted by definition, $D_A[0]+D_A[1]+\ldots+D_A[i-1]$ is the sum of the $i$ smallest elements in $D_A$.↵
↵
Let's expand $A_i+B_j$ in this definition. $A_i+B_j = A_0+B_0 + (i \text{ smallest elements in }A) + (j \text{ smallest elements in }B)$.↵
↵
If we imagine $D$ as the concatenation of $D_A$ and $D_B$ in the sorted order, then we can imagine $C_k$ as picking the best $k$ elements in $D$ such that it follows the constraints that $i$ of those elements came from $A$ and $j$ of them came from $B$. No matter how you pick $i$ elements from $A$ and $j$ elements from $B$, you will end up picking $i+j$ elements from $D$ in total.↵
↵
Now, we want to minimize the sum of the $k$ elements we pick from $D$. The obvious thing to try is to pick the first $k$ elements from $D$, since we have already sorted $D$. This works because those elements came from a prefix of $D_A$ and a prefix of $D_B$. ↵
↵
Let's use $A=[1,2,6,14]$ and $B=[1,3,5,8,20]$ as examples. ↵
↵
↵
↵
The balls represent the difference array of $A$ and $B$, respectively colored in red and blue.↵
↵
↵
↵
And here is the array $D$. You can see that picking any prefix of $D$ corresponds to picking some prefix from $D_A$ and $D_B$.↵
↵
We can see that $D_C=D$ actually. Furthermore, a nice thing you want to realize about this is that if $A_i+B_j$ obtains the minimum value for $C_k$, then either $A_{i+1}+B_j$ or $A_i+B_{j+1}$ obtains the minimum value for $C_{k+1}$. This is because $C_{k+1}-C_k$ corresponds to a ball. If the ball is red, it corresponds to $A_{i+1}$, otherwise, it corresponds to $B_{j+1}$.↵
↵
Corollary: $C$ is also convex. The difference array of $C$ is non-decreasing.↵
↵
There is also concave convolution, in which we have convolution of the form $C_k = \max\limits_{i+j=k} A_i+B_j$. We solve this quickly when $A$ and $B$ are concave, that is their difference arrays are non-
↵
## Merchant Otter↵
(problem is from local judge so I will not attach the link to the question)↵
↵
#### Abridged Statement↵
↵
Merchant otter knows the prices of stock for the next $N$ days. Namely, she knows that you can sell stock for $S_i$ yen on the $i$-th day and you can buy stock for $B_i$ yen on the $i$-th day. Obviously, $s_i \leq b_i$.↵
↵
Merchant otter starts with $0$ stock in the beginning. Everyday she can buy at most $1$ stock and sell at most $1$ stock. For some reason, the amount of stock she has must be in the range $[-K,K]$ at all times. Find the maximum profit she can have after $N$ days.↵
↵
* $1 \leq K \leq N \leq 10^6$↵
* $0 \leq s_i \leq b_i \leq 10^9$↵
↵
#### Solution↵
↵
Let $dp[i][j]$ be the maximum profit we have if on the end of the $i$-th day we have $j$ shares. Let's pretend that the constraint that the stocks must be in the range $[-K,K]$ does not exist for a while.↵
↵
We have the following transition $dp[i][j]=\max(dp[i-1][j
↵
This is almost concave convolution! Let's have $A[j]=[
↵
Then our transition is of the form $C_k = \max\limits_{i+j=k} A_i+B_j$. When we are performing many concave convolutions, it is usually better to store the array in its **gradient form**. Then, assuming we have $B_0$ and $D_B$, we can obtain $C_0$ and $D_C$ quickly via the following:↵
↵
* $C_0 \gets B_0 + s_i$↵
* $D_C \gets sort(D_B + [-s_i,-b_i])$↵
↵
Great, we are almost done, we just need to add the additional constraint that the number of stocks we have must be in the range $[-K,K]$. The only thing we have to do here is possibly delete the first and last element of $C$ where we only store $C_0$ and $D_C$.↵
↵
Deleting the last element of $C$ is easy, just delete the last element from $D_C$. To delete the first element of $C$, first update $C_0 \gets C_0 + D_C[0]$, the delete the first element from $D_C$.↵
↵
Overall, the code becomes very short.↵
↵
<spoiler summary="Code">↵
↵
```cpp↵
#include <bits/stdc++.h>↵
using namespace std;↵
↵
int n,k;↵
multiset<int,greater<int> > s; //non-decreasing order↵
↵
int main(){↵
cin>>n>>k;↵
↵
int B,S;↵
long long ans=0;↵
for (int x=0;x<n;x++){↵
cin>>B>>S;↵
s.insert(-B),s.insert(-S);↵
↵
ans+=S;↵
if (x>=k){ //delete the first and last elements↵
ans+=(*s.begin());↵
s.erase(s.begin());↵
s.erase(--s.end());↵
}↵
}↵
↵
for (int x=0;x<min(n,k);x++){↵
ans+=(*s.begin());↵
s.erase(s.begin());↵
}↵
↵
cout<<ans<<endl;↵
}↵
```↵
↵
</spoiler>↵
↵
## [Social Distancing](https://nus.kattis.com/problems/socialdistancing)↵
↵
#### Abridged Statement↵
↵
You are given a array of $n$ numbers $a_1,a_2,\ldots,a_n$. You want to select a permutation $p_1,p_2,\ldots,p_n$ of size $n$ such that the following cost $\sum\limits_{i=1}^{n-1} a_{\max(p_i, p_{i+1})}$ is minimized. Find the minimum possible cost.↵
↵
* $1 \le n \le 3 \cdot 10 ^ 5$↵
* $1 \le a_i \le 10 ^ 9$↵
↵
#### Ideas↵
↵
We can iterate from $i=1$ to $i=n$ and pick which position to put $i$. If you put $a_i$ directly adjacent to two earlier elements, it will contribute to a cost of $2a_i$. If you put it adjacent to one, it will contribute to a cost of $a_i$. Otherwise, if you put it by itself, it will not contribute to the cost.↵
↵
For example, for the array $a = [1, 3, 5]$, we first place $a_1$ by itself as there is nothing else placed yet. Then, we can put $a_2$ by itself as well and finally we put $a_3$ in the middle of both of them, contributing to a cost of $10$. However, we can achieve a cost of 8 by putting $a_2$ next to $a_1$, contributing to a cost of $3$ and finally putting $a_3$ next to $a_2$, contributing to a cost of $5$.↵
↵
We can think of the operations as the following. Combining two connected components incur a cost of $2a_i$, doing nothing incurs a cost of $a_i$, and adding a connected component is free. Hence, we can come up with the following dp. ↵
↵
$dp[i][j] = \min(dp[i - 1][j + 1] + 2a_i,\ dp[i - 1][j] + a_i,\ dp[i - 1][j - 1])$↵
↵
Using the same array $a = [1, 3, 5]$, we have the following dp table where the cell in the $i$-th row and $j$-th column represent $dp[i][j]$.↵
↵
| i\j | 1 | 2 | 3 |↵
|:-----:|:---------------:|:---------------:|:---------------:|↵
| 1 | 0 | $\infty$ | $\infty$ |↵
| 2 | 3 | 0 | $\infty$ |↵
| 3 | 8 | 3 | 0 |↵
↵
#### Solution↵
↵
(Let us pretend that we do not know what convex convolution is so that we can see intuitively why convex convolution works)↵
↵
From the dp function, we can see that $dp[i]$ is just made up of 3 different copies of $dp[i - 1]$ shifted in different directions. This is often how slope trick looks like. Let us draw some graphs to see how the dp changes from $i - 1$ to $i$.↵
↵
![Image of dp[1], dp[2] and dp[3]](https://codeforces.com/predownloaded/9d/31/9d31e4143bb09301538f7b7491a4694f05650908.png)↵
↵
<img src="https://codeforces.com/predownloaded/d7/d3/d7d359a460292b4487c85323f89abd3a29d07b1b.png" alt="Image of dp[2] pasted 3 times to form dp[3]" width="50%" style="float: left"/> ↵
↵
Let us see how we can obtain the graph of $dp[i]$ from $dp[i - 1]$. From the recurrence relation, we can see that $dp[i]$ is obtained by taking the minimum of the following 3 graphs: $dp[i - 1]$ shifted 1 to the right, $dp[i - 1]$ shifted $a_i$ upwards, and $dp[i - 1]$ shifted 1 to the left and $2a_i$ upwards.↵
↵
As you can see in the image to the right, $dp[3]$ (shown in blue lines) can be formed by duplicating $dp[2]$ (shown in dotted lines) 3 times. Furthermore, the gradients of the resulting graph seems to be related to $a_i$.↵
↵
</br>↵
↵
Let us see how the dp function changes for a more complicated function. For this purpose, we will use the array $a = [1, 5, 5, 3, 6, 4]$. Supposed we have already calculated $dp[5]$ (shown in dotted lines) and want to calculate $dp[6]$.↵
↵
![Image of dp[5] to dp[6]](https://codeforces.com/predownloaded/51/b2/51b2dd0b5573c41dca5414f0a6080e0d8a015a88.png)↵
↵
Note that the crosses are colour coded according to which $j$ it came from ($dp[5][1]$ is cyan, $dp[5][2]$ is green, $dp[5][3]$ is blue, $dp[5][4]$ is magenta, and $dp[5][5]$ is brown). We can see that as we compare the 3 overlapping graphs, the point where one graph starts to become the minimum is when the gradient becomes larger than $a_i$ (in this case $a_6 = 4$). Why is that so?↵
↵
If we only compare the red and black line, we see that the difference between a point on the red line and the same coloured point on the black line (it is one spot to the left) always has a difference of $a_i$. This is because same coloured points comes from the same $dp[i - 1][j]$ and only differ from shifting upwards by $a_i$. ↵
↵
Hence, when we look from right to left, while the gradient of the red line is less than $a_i$, the red line is always optimal as the difference between two adjacent points on the red line is equal to the gradient while the difference between the adjacent points on the black line and red line is equal to $a_i$. The moment $a_i$ becomes smaller than the gradient, the black line becomes more optimal instead, and when we switch from the black line to red line, the new gradient in between the two lines is $a_i$ (see the blue points on the right graph).↵
↵
Hence, if we store the gradients of $dp[i - 1]$ in a priority queue, all we need to do to transition to $dp[i]$ is to insert $a_i$ two times. However, since we do not want $dp[i][0]$, we can just pop out the largest gradient which represents $dp[i][0]$. Then after we are done processing $dp[n]$, the answer is just the sum of the gradients in the priority queue.↵
↵
<spoiler summary="Code">↵
↵
```cpp↵
int main() {↵
int n; cin >> n;↵
vector<int> a(n);↵
for (int i = 0; i < n; i++) {↵
cin >> a[i];↵
}↵
priority_queue<long long> pq;↵
for (int i = 1; i < n; i++) {↵
pq.push(a[i]);↵
pq.push(a[i]);↵
pq.pop();↵
}↵
long long ans = 0;↵
while (!pq.empty()) {↵
ans += pq.top(); pq.pop();↵
}↵
cout << ans << '\n';↵
return 0;↵
}↵
```↵
↵
</spoiler>↵
↵
Note that what we are doing is actually just convex convolution with $A[j]=[2a_i,a_i,0]$, $B[j]=dp[i-1][j]$, $C[j]=dp[i][j-1]$. ↵
↵
## [RMI21 — Paths](https://oj.uz/problem/view/RMI21_paths)↵
↵
#### Abridged Statement (Modified)↵
↵
You have a tree of $n$ vertices. The weight of the $i$-th edge is equal to $c_i$. You want to select $k$ vertices such that the sum of the weights of all edges that lie on the path of vertex $1$ to any one of the $k$ vertices is maximised. Find the maximum possible sum.↵
↵
* $1 \le k \le n \le 10^5$↵
* $0 \le c_i \le 10^9$↵
↵
#### Ideas↵
↵
It is obvious that we will only select the leaf nodes as they will cover all their parent nodes as well. We can come up with a $O(nk)$ dp solution easily. For each vertex $u$, let $dp[u][j]$ be the answer for the subtree of $u$ while selecting $j$ vertices.↵
↵
For leaf vertices, we have $dp[u][0] = 0$. When we have multiple edges, we have a knapsack-like transition. For every edge $u \rightarrow v$ where $u$ is the parent of $v$ and the edge weight is $c$, $dp[u][j] = \max_{k \le j} dp[u][j - k] + dp[v][k] + [k > 0] \cdot c$. What this dp is doing is that if you choose at least one leaf in the subtree of $v$ (represented by boolean $[k > 0]$), then cost $c$ will be included in the final sum. Then, the remaining $j - k$ selected vertices can go to the other edges in the subtree of $u$.↵
↵
As a side note, the whole dp works in ammortised $O(nk)$ due to distribution dp. If you do not know what it is you can check [this comment](https://codeforces.com/blog/entry/100910?#comment-896003).↵
↵
#### Solution↵
↵
Of course, we will plot our dp function on a graph again. Suppose we have the following tree↵
↵
↵
↵
Let us see how we can obtain $dp[1]$. First, we have to increase all $dp[v][j]$ by $c_{u, v}$ for all $j \ge 1$. We see that this operation is just increasing the first gradient by $c_{u, v}$.↵
↵
![Graph of dp[2] and dp[3]](https://codeforces.com/predownloaded/f4/21/f42148c63ca369a4073fdd00042971b3f65e45cf.png)↵
↵
To combine the two graphs, we realise that we are actually just combining the gradients of both graphs in decreasing order. In the diagram below, the blue lines represent the lines from $dp[2]$ and the orange lines represent the lines from $dp[3]$.↵
↵
![Graph of dp[1]](https://codeforces.com/predownloaded/5f/26/5f26545782ba8299431b1ce8b4445c3b8e761cd9.png)↵
↵
To implement this, we simply store a priority queue of the gradients at every vertex, then do small to large merging to calculate the new gradients for its parent.↵
↵
Do note that this is actually just convex convolution but I illustrated it with diagrams to hopefully make convex convolution clearer.↵
↵
<spoiler summary="Code">↵
↵
```cpp↵
const int MAXN = 100005;↵
↵
int n, k;↵
vector<pair<int, int>> adj[MAXN];↵
↵
priority_queue<long long> dp[MAXN];↵
void dfs(int u, int p) {↵
while (!dp[u].empty()) {↵
dp[u].pop();↵
}↵
for (auto [v, w] : adj[u]) {↵
if (v == p) continue;↵
dfs(v, u);↵
long long x = dp[v].top(); dp[v].pop();↵
dp[v].push(x + w);↵
if (dp[u].size() < dp[v].size()) {↵
swap(dp[u], dp[v]);↵
}↵
while (!dp[v].empty()) {↵
long long x = dp[v].top(); dp[v].pop();↵
dp[u].push(x);↵
}↵
}↵
if (dp[u].empty()) {↵
dp[u].push(0);↵
}↵
}↵
↵
int main() {↵
cin >> n >> k;↵
for (int i = 1; i < n; i++) {↵
int a, b, c; cin >> a >> b >> c;↵
adj[a].push_back({b, c});↵
adj[b].push_back({a, c});↵
}↵
dfs(1, -1);↵
long long ans = 0;↵
while (!dp[1].empty() && k--) {↵
long long x = dp[1].top(); dp[1].pop();↵
ans += x;↵
}↵
cout << ans << '\n';↵
return 0;↵
}↵
```↵
↵
</spoiler>↵
↵
#### Greedy Observation↵
↵
Stare at the above code for a few seconds... Do you see the greedy that the code is effectively doing?↵
↵
We are effectively assigning each edge $u \rightarrow v$ to the leaf which is the furthest distance from $v$, and then choosing the largest $k$ leaves at the end.↵
↵
↵
↵
As we can see in the above diagram, edge $1 \rightarrow 3$ belongs to leaf $8$ as the distance from $3$ to $8$ is larger than the distance from $3$ to $7$. The same argument can be used for $1 \rightarrow 2$.↵
↵
After assigning all the edges to the leaves, leaf $4$ has weight $3$, leaf $5$ has weight $1$, leaf $8$ has weight $4$, and leaf $7$ has weight $2$. So we simply select the $k$ largest weights and that will be our answer.↵
↵
With this greedy observation, we can come up with an even simpler code which is faster as it does not require set merging. We can just keep a global set containing the weights of the leaves, and store an extra array $mx[u]$ containing the leaf with the maximum weight in the subtree of $u$.↵
↵
<spoiler summary="Code">↵
↵
```cpp↵
const int MAXN = 100005;↵
↵
int n, k;↵
vector<pair<int, int>> adj[MAXN];↵
↵
multiset<long long> st;↵
long long mx[MAXN];↵
void dfs(int u, int p) {↵
mx[u] = 0;↵
bool leaf = 1;↵
for (auto [v, w] : adj[u]) {↵
if (v == p) continue;↵
leaf = 0;↵
dfs(v, u);↵
st.erase(st.find(mx[v]));↵
st.insert(mx[v] + w);↵
mx[u] = max(mx[u], mx[v] + w);↵
}↵
if (leaf) {↵
st.insert(0);↵
}↵
}↵
↵
int main() {↵
cin >> n >> k;↵
for (int i = 1; i < n; i++) {↵
int a, b, c; cin >> a >> b >> c;↵
adj[a].push_back({b, c});↵
adj[b].push_back({a, c});↵
}↵
dfs(1, -1);↵
long long ans = 0;↵
while (st.size() > k) {↵
st.erase(st.begin());↵
}↵
for (long long x : st) {↵
ans += x;↵
}↵
cout << ans << '\n';↵
return 0;↵
}↵
```↵
↵
</spoiler>↵
↵
You might be thinking, we already solved this problem, what's the point of the greedy observation?? Well... I tricked you and there is more to the problem.↵
↵
#### Abridged Statement (Original)↵
↵
You have a tree of $n$ vertices. The weight of the $i$-th edge is equal to $c_i$. **For each root $\boldsymbol{r}$**, you want to select $k$ vertices such that the sum of the weights of all edges that lie on the path of **vertex $\boldsymbol{r}$** to any one of the $k$ vertices is maximised. Find the maximum possible sum **for each root $\boldsymbol{r}$**.↵
↵
#### Solution↵
↵
The final solution is a lot easier using the greedy observation. Since we want the answer for each root, we can simply do rerooting dp, maintaining 2 sets, one containing the largest $k$ elements and the other containing the remaining elements. We can easily update the sets, sums, and max while rerooting.↵
↵
Since this is a slope trick blog, I will not cover the rerooting dp. You can read my code [here](https://oj.uz/submission/537654) to try to figure it out yourself if you are curious.
