By anta.baka, history, 3 years ago, translation, In English

Hi all!

This weekend, at Dec/20/2020 18:05 (Moscow time) we will hold Codeforces Round 692. It is based on problems of Technocup 2021 Elimination Round 3 that will be held at the same time.

Technocup is a major olympiad for Russian-speaking high-school students, so if you fall into this category, please register at Technocup 2021 website and take part in the Elimination Round.

Div. 1 and Div.2 editions are open and rated for everyone. Register and enjoy the contests!

The Elimination Round authors are neckbotov and anta.baka. Thanks to budalnik and KAN for their coordination. Also huge thanks to testers for their invaluable help: isaf27, 300iq, Kaban-5, low_, Shinchan01, wiwitrifai, Ashishgup, spar5h, Nemo, Gauravvv, Vax, XLor, Um_nik, ADJA, jiufeng, RobeZH, Daryusz, antontrygubO_o, Normie28, kalki411, gratus907, manik.jain!

Have fun!

Elimination Round will feature 7 problems, preliminary costs are
500 — 1000 — 1750 — 2000 — 2250 — 2750 — 3250.

Div. 2 will feature 6 problems, preliminary costs are
500 — 1000 — 1750 — 2000 — 2250 — 2750.

Div. 1 will feature 6 problems, preliminary costs are
750 — 1000 — 1250 — 1750 — 2250 — 3000.

The analysis is published.

The round is over, congratulations to the winners!

Technocup 2021 - Elimination Round 3

  1. almogwald
  2. serg3000
  3. Pechalka
  4. denisrtyhb
  5. amanbol

Codeforces Round 692 (Div. 1, based on Technocup 2021 Elimination Round 3)

  1. EricHuang2003
  2. jiangly
  3. hos.lyric
  4. ecnerwala
  5. ugly2333

Codeforces Round 692 (Div. 2, based on Technocup 2021 Elimination Round 3)

  1. KanbeKotori
  2. xmt
  3. RNG-Ming
  4. YANK01
  5. meidong
  • Vote: I like it
  • +295
  • Vote: I do not like it

| Write comment?
»
3 years ago, # |
  Vote: I like it +42 Vote: I do not like it

))

»
3 years ago, # |
  Vote: I like it +64 Vote: I do not like it

Don't forget to notice the unusual start time!!!

»
3 years ago, # |
  Vote: I like it +17 Vote: I do not like it

I think some registration cleanups need to be done after the rating update from the previous contest

https://codeforces.com/contestRegistrants/1465?order=BY_RATING_DESC

https://codeforces.com/contestRegistrants/1464?order=BY_RATING_ASC

»
3 years ago, # |
  Vote: I like it +2 Vote: I do not like it

I am unable to type in the city name in the Technocup registration page(the input box isn't working ).Can anyone help?

»
3 years ago, # |
Rev. 4   Vote: I like it +158 Vote: I do not like it

As a person who is familiar with the anta.baka and neckbotov, I think that Russian-speaking high-school students are in good hands. I can assure you that everything will be all right with the contest, because anta.baka's passport is in my pocket.

»
3 years ago, # |
  Vote: I like it -21 Vote: I do not like it

How can I improve?

»
3 years ago, # |
  Vote: I like it +2 Vote: I do not like it

I hope that I reach Pupil after this contest.

»
3 years ago, # |
  Vote: I like it +22 Vote: I do not like it

As a tester, I say that Problems are Interesting :)

»
3 years ago, # |
Rev. 2   Vote: I like it +21 Vote: I do not like it

In letter from Mail.ru was said that contest will start 20.00 MSK, but here there is other time.

»
3 years ago, # |
Rev. 4   Vote: I like it -58 Vote: I do not like it

.

  • »
    »
    3 years ago, # ^ |
      Vote: I like it +24 Vote: I do not like it

    There are literally thousands of blogs related to your question (Google?) and why are you asking this here in the contest announcement blog? :/

    P.S: registered 7 months and still new KEKW

»
3 years ago, # |
  Vote: I like it +2 Vote: I do not like it

Scoring distribution??

  • »
    »
    3 years ago, # ^ |
      Vote: I like it +3 Vote: I do not like it
  • »
    »
    3 years ago, # ^ |
      Vote: I like it +9 Vote: I do not like it

    Elimination Round will feature 7 problems, preliminary costs are 500 — 1000 — 1750 — 2000 — 2250 — 2750 — 3250.

    Div. 2 will feature 6 problems, preliminary costs are 500 — 1000 — 1750 — 2000 — 2250 — 2750.

    Div. 1 will feature 6 problems, preliminary costs are 750 — 1000 — 1250 — 1750 — 2250 — 3000.

»
3 years ago, # |
  Vote: I like it 0 Vote: I do not like it

I am gonna reach pupil.

»
3 years ago, # |
  Vote: I like it +10 Vote: I do not like it

Is it just me, or does the scoring distribution of Division 2 seems a bit scary?

»
3 years ago, # |
  Vote: I like it -37 Vote: I do not like it

is it rated?

  • »
    »
    3 years ago, # ^ |
      Vote: I like it +9 Vote: I do not like it

    Div. 1 and Div.2 editions are open and rated for everyone. Register and enjoy the contests!

»
3 years ago, # |
  Vote: I like it +49 Vote: I do not like it

*Me after doing A and B: Let's check comment section

»
3 years ago, # |
  Vote: I like it +9 Vote: I do not like it

Pretest 4 ruined the party for me... Looking forward to the solution to this one! :D

»
3 years ago, # |
  Vote: I like it 0 Vote: I do not like it

I have a doubt, for a problem if i did wrong submissions and didn't solve that question in the contest, will these wrong submissions have any effect on my ranking?

»
3 years ago, # |
Rev. 2   Vote: I like it 0 Vote: I do not like it
The comment removed because of Codeforces rules violation
»
3 years ago, # |
  Vote: I like it +2 Vote: I do not like it

What's test 5 in div2C (after contest)

»
3 years ago, # |
  Vote: I like it +56 Vote: I do not like it

»
3 years ago, # |
  Vote: I like it +10 Vote: I do not like it

Can C be done using number of cycles count?

  • »
    »
    3 years ago, # ^ |
    Rev. 2   Vote: I like it +7 Vote: I do not like it

    Yes, initialise ans = m, for every cycle increment ans, for every rook at (i, i) decrement ans

    • »
      »
      »
      3 years ago, # ^ |
        Vote: I like it +5 Vote: I do not like it

      Implemented this and got WA on test 5. How?

      • »
        »
        »
        »
        3 years ago, # ^ |
          Vote: I like it +6 Vote: I do not like it

        Try this test case — 1 5 4 1 2 2 3 4 1 5 5
        Correct answer is 3. Many incorrect codes will output 4.

        • »
          »
          »
          »
          »
          3 years ago, # ^ |
          Rev. 2   Vote: I like it 0 Vote: I do not like it

          Thanks! My code is giving WA on this. I understood my mistake.

        • »
          »
          »
          »
          »
          3 years ago, # ^ |
            Vote: I like it 0 Vote: I do not like it

          Implementation mistake. How to implement correctly?

          • »
            »
            »
            »
            »
            »
            3 years ago, # ^ |
              Vote: I like it 0 Vote: I do not like it

            I wrote a recursive solution Code

          • »
            »
            »
            »
            »
            »
            3 years ago, # ^ |
            Rev. 3   Vote: I like it +1 Vote: I do not like it

            I also done it using number of cycles count and same i also got WA in pretest 5 . Maybe you also done same mistake . During checking cycles , some cycles are not exactly cycles. ( means 1 2 3 but 3 to 1 not possible ) But in last i changed and it got accepted .

        • »
          »
          »
          »
          »
          3 years ago, # ^ |
            Vote: I like it 0 Vote: I do not like it

          my answer is 3 and i'm still WA on test 5

          • »
            »
            »
            »
            »
            »
            3 years ago, # ^ |
              Vote: I like it 0 Vote: I do not like it

            Same for me. Was it wrong answer on the 45th output? Did you find what was the error?

            • »
              »
              »
              »
              »
              »
              »
              3 years ago, # ^ |
                Vote: I like it 0 Vote: I do not like it

              i'm WA on the 213rd output

              • »
                »
                »
                »
                »
                »
                »
                »
                3 years ago, # ^ |
                  Vote: I like it 0 Vote: I do not like it

                OMG okay. I figured out my issue though. Initialization problem.

  • »
    »
    3 years ago, # ^ |
      Vote: I like it 0 Vote: I do not like it

    Yep, I passed the pretest. Don't know about system test though.

  • »
    »
    3 years ago, # ^ |
      Vote: I like it +21 Vote: I do not like it

    Yeah, any rook on the diagonal contributes 0 to the answer.

    Any rook not on the diagonal contributes 1 to the answer.

    Additionally, any cycle contributes 1 to the answer.

    This is optimal because moving a rook already on the diagonal off the diagonal is a waste of moves. Any rook not on the diagonal needs at least 1 move to get on the diagonal. And any cycle of $$$n$$$ pieces needs $$$n+1$$$ to resolve (you need to move a piece to a free column/row to remove the cycle, put $$$n-1$$$ pieces on the diagonal, then move back the original piece to the diagonal, for a total of $$$n+1$$$ moves)

    • »
      »
      »
      3 years ago, # ^ |
        Vote: I like it 0 Vote: I do not like it

      Can you please share your code?. Mine is bit lengthy and unreadable.

      • »
        »
        »
        »
        3 years ago, # ^ |
          Vote: I like it 0 Vote: I do not like it

        Not sure if you can see it now but it should be visible once system tests finish (and I hope mine passes :P link)

»
3 years ago, # |
Rev. 2   Vote: I like it +20 Vote: I do not like it

Aah! This $$$D2C$$$ today:

»
3 years ago, # |
  Vote: I like it +1 Vote: I do not like it

how to solve c??

  • »
    »
    3 years ago, # ^ |
      Vote: I like it +3 Vote: I do not like it

    ignore all points on diagonals. for every other point, connect every 2 sharing x or y.

    for each connected component, check if at least 1 point can be moved to diagonal in 1 move.

    if so, ans += no of points in the component. otherwise, ans += no of points in component + 1

    • »
      »
      »
      3 years ago, # ^ |
        Vote: I like it +3 Vote: I do not like it

      did the exact same thing , got wrong answer on pretest 5 . any case i may be missing ?

  • »
    »
    3 years ago, # ^ |
      Vote: I like it 0 Vote: I do not like it

    Some hack tests:

    5 4

    1 2

    2 1

    4 5

    5 4

    Then the answer is 6.

    For each rooks $$$(x, y)$$$, add an edge between $$$x$$$ and $$$y$$$.

    For each connect component, if it is a tree, the answer of this component is the number of rooks. And if it is a cycle, the answer of this component is 1 + the number of rooks.

    • »
      »
      »
      3 years ago, # ^ |
        Vote: I like it 0 Vote: I do not like it

      this approach also giving wrong answer

      • »
        »
        »
        »
        3 years ago, # ^ |
          Vote: I like it 0 Vote: I do not like it

        Oh, maybe you forget considering $$$(x, x)$$$ ? And this rook is ok, and needs no move.

    • »
      »
      »
      3 years ago, # ^ |
      Rev. 2   Vote: I like it 0 Vote: I do not like it

      can u explain the intuation behind it? pllzzzzzzzzz

      • »
        »
        »
        »
        3 years ago, # ^ |
        Rev. 2   Vote: I like it +2 Vote: I do not like it

        When I tested this round, I firstly guess the answer is $$$m$$$ or $$$m+1$$$ (remove rooks at $$$(x,x)$$$).

        The difference between this two case is that the set of x coordinates and the set of y coordinates. You can see that if these two sets are same, then the answer is $$$m+1$$$, otherwise $$$m$$$. Like 2 rooks $$$(1,2)$$$ and $$$(2,1)$$$, the answer is 3 because $$${1,2}={1,2}$$$. If the first rook $$$(1, 2)$$$ wants to go to $$$(1, 1)$$$, but $$$(1, 1)$$$ is banned by $$$(2, 1)$$$. And if the first rook wants to go to $$$(2, 2)$$$, $$$(2,2)$$$ is also banned by $$$(2, 1)$$$. Is it like a cycle?

        And 2 rooks $$$(1, 3)$$$ and $$$(2, 1)$$$, the answer is 2. The first rook goes to $$$(3, 3)$$$, and $$$(2, 1)$$$ goes to $$$(2, 2)$$$, this may be a chain.

        However, the above conclusion does not work only when the board can be split into many parts, like the above hack test. And then add an edge between x coordinate and y coordinate may be a trick with DSU. There is a similar problem 1013D - Chemical table. Finally, if you do this, you can get the above conclusion.

        • »
          »
          »
          »
          »
          3 years ago, # ^ |
            Vote: I like it 0 Vote: I do not like it

          Can u explain how you are taking an edge between the two cells of the board?

          If you can explain with your above example it would be really helpful.

    • »
      »
      »
      3 years ago, # ^ |
      Rev. 3   Vote: I like it 0 Vote: I do not like it

      Solved. Thanks

»
3 years ago, # |
  Vote: I like it 0 Vote: I do not like it

How to do D2C ?

»
3 years ago, # |
  Vote: I like it +10 Vote: I do not like it

I think Div 1 Problem E can turn into : the probability of choosing some number from the sg numbers that =0. Am I right?

  • »
    »
    3 years ago, # ^ |
      Vote: I like it +10 Vote: I do not like it

    If I am right , how to compute? Using basis?

  • »
    »
    3 years ago, # ^ |
      Vote: I like it +47 Vote: I do not like it

    It turns into "compute probability that the resulting Grundy number is $$$x$$$, for each $$$x$$$. You can write a classic recurrent probability formula $$$p(x) = \frac{(x = 0)}{N+1} + \sum_{i=1}^N \frac{1}{N+1} p(x \oplus g_i)$$$ and turn it into Gaussian elimination since the Grundy numbers of vertices are $$$0 \le g_i \lt 512$$$ (approx. $$$\sqrt{M}$$$).

    • »
      »
      »
      3 years ago, # ^ |
      Rev. 3   Vote: I like it 0 Vote: I do not like it

      I'm so sad, during the contest I (wrongly) concluded that the grundy values can only be 0 and 1, therefore we have just 2 states in our linear system, and Gaussian elimination isn't needed Q_Q

      Followup question, which might be stupid: is it true that under modulo M, if you have $$$a = P_a*Q_a^{-1}$$$ and $$$b = P_b*Q_b^{-1}$$$, and you take $$$c = a * b $$$ $$$=$$$ $$$P_c*Q_c^{-1}$$$, that the $$$P_c$$$ and $$$Q_c$$$ are automatically coprime and you never need to do any GCD-ing?

      I think it is but I'm not 100% sure, thanks.

      • »
        »
        »
        »
        3 years ago, # ^ |
          Vote: I like it +8 Vote: I do not like it

        You should notice that modulo $$$M$$$, a fraction $$$p/q$$$ is the same as $$$pa/qa$$$ for any integer $$$a$$$ coprime with $$$M$$$. We don't care if the numerator and denominator are coprime with each other, only that the denominator is coprime with $$$M$$$ — which makes sense, they represent the same thing. You'd only care about the exact values when printing fractions or dealing with some operations like "add square of denominator to numerator".

        Of course the Grundy values aren't just 0 or 1, take a semicomplete DAG.

    • »
      »
      »
      3 years ago, # ^ |
        Vote: I like it 0 Vote: I do not like it

      So the time complexity of the Gaussian elimination part is $$$O(M\sqrt M)$$$?

      • »
        »
        »
        »
        3 years ago, # ^ |
          Vote: I like it 0 Vote: I do not like it

        Yes,it can pass in $$$O(M\sqrt M)$$$. Though I found this dp transformation in the contest,but I didn't realize the size of dp status is up to $$$\sqrt M$$$(Maybe I'm not familiar with sg numbers),and I focus in finding the probability of "Xor equal to zero".In fact I have never seen the problem which need Gaussian elimination to update dp. It's a good problem ,thanks!

»
3 years ago, # |
Rev. 2   Vote: I like it -83 Vote: I do not like it

Do you know those annoying implementation problems that have like 100 cases? Well, C is the perfect example of it. :))

  • »
    »
    3 years ago, # ^ |
      Vote: I like it +32 Vote: I do not like it

    C is a graph problem.

    • »
      »
      »
      3 years ago, # ^ |
        Vote: I like it 0 Vote: I do not like it

      can you tell your approach

    • »
      »
      »
      3 years ago, # ^ |
        Vote: I like it +3 Vote: I do not like it

      I think it can also be done using arrays (to find cycles).

      • »
        »
        »
        »
        3 years ago, # ^ |
          Vote: I like it 0 Vote: I do not like it

        Yep storing y coordinate for every x coordinate and then looping till you get the initial x or some x which has no y. If you get your initial x you found a loop otherwise you didn't. Keep marking the visited vertices.

  • »
    »
    3 years ago, # ^ |
      Vote: I like it +10 Vote: I do not like it

    How? :/

»
3 years ago, # |
  Vote: I like it +1 Vote: I do not like it

What's the solution for Div2C/Div1A ? I did it by counting the number of cycles formed in the graph when each rook position (x,y) is connected to (x,x) and (y,y), and then added it to the number of rooks not on the main diagonal.

I'm sure there must be an easy solution.

  • »
    »
    3 years ago, # ^ |
      Vote: I like it 0 Vote: I do not like it

    mine is also the same I don't know why it's getting the wrong answer

  • »
    »
    3 years ago, # ^ |
      Vote: I like it +2 Vote: I do not like it

    For each $$$(i,i)$$$, connect the rook in row $$$i$$$ with the rook in column $$$i$$$ with an edge. Discard self-loops. The resulting graph is a union of cycles and paths, the answer is number of vertices + number of cycles.

    • »
      »
      »
      3 years ago, # ^ |
        Vote: I like it 0 Vote: I do not like it

      can explain the intuition behind it??

      • »
        »
        »
        »
        3 years ago, # ^ |
          Vote: I like it 0 Vote: I do not like it

        Take a path. You can move one rook from one end to the diagonal, shortening the path. For a cycle, you can't do that, so you need at least one extra operation with an unused row/column ($$$M < N$$$ so it's always possible), and using that operation turns this cycle into a path.

»
3 years ago, # |
  Vote: I like it +31 Vote: I do not like it

Worst Div2B ever. I thought I'd get TLE with simple brute force approach but then I looked at the number of submissions.

  • »
    »
    3 years ago, # ^ |
      Vote: I like it 0 Vote: I do not like it

    how does that make Div2B worse if lot of people solved it fast and you didn't

    • »
      »
      »
      3 years ago, # ^ |
        Vote: I like it +18 Vote: I do not like it

      Because a lot of people (including me) solved it by looking at speed at which people were getting AC.

      • »
        »
        »
        »
        3 years ago, # ^ |
          Vote: I like it 0 Vote: I do not like it

        How to solve B?

        • »
          »
          »
          »
          »
          3 years ago, # ^ |
            Vote: I like it +7 Vote: I do not like it

          Keep increasing n until you find the one satisfying the required property.

          • »
            »
            »
            »
            »
            »
            3 years ago, # ^ |
              Vote: I like it +1 Vote: I do not like it

            is this a joke?

            • »
              »
              »
              »
              »
              »
              »
              3 years ago, # ^ |
                Vote: I like it +19 Vote: I do not like it

              Only after you get AC.

              • »
                »
                »
                »
                »
                »
                »
                »
                3 years ago, # ^ |
                  Vote: I like it +1 Vote: I do not like it

                I need to look at the constraints more

                • »
                  »
                  »
                  »
                  »
                  »
                  »
                  »
                  »
                  3 years ago, # ^ |
                  Rev. 2   Vote: I like it +10 Vote: I do not like it

                  There exists at least one valid answer every $$$9!$$$ which equals $$$362880$$$. To be more precise, LCM of $$$1, 2, 3, 4, 5, 6, 7, 8, 9$$$ is $$$2520$$$, so at least one valid answer exists every $$$2520$$$. That's why you can do a linear search.

                • »
                  »
                  »
                  »
                  »
                  »
                  »
                  »
                  »
                  3 years ago, # ^ |
                  Rev. 2   Vote: I like it 0 Vote: I do not like it

                  I wish I had thought this. I wrote the correct ans and them keep worry for next 2 hrs hope system test won't break my solution.

        • »
          »
          »
          »
          »
          3 years ago, # ^ |
            Vote: I like it +2 Vote: I do not like it

          Every 2520th number has this property, so just brute force for each number from N to the next multiple of 2520. You could have also run a simple while loop, but that gives no proof to why it won't TLE.

          • »
            »
            »
            »
            »
            »
            3 years ago, # ^ |
              Vote: I like it +4 Vote: I do not like it

            For anyone wondering how 2520, it is the lcm of 1 2 3 4 5 6 7 8 9.

      • »
        »
        »
        »
        3 years ago, # ^ |
          Vote: I like it 0 Vote: I do not like it

        standings are available to everyone so you can see and guess whatever you want.Though i proved myself .

        • »
          »
          »
          »
          »
          3 years ago, # ^ |
            Vote: I like it +1 Vote: I do not like it

          "standings are available to everyone so you can see and guess whatever you want" ==> And when whatever = solution, that makes a problem worse.

    • »
      »
      »
      3 years ago, # ^ |
        Vote: I like it +10 Vote: I do not like it

      I'm damn sure 90% of the people solved B without even thinking of its complexity ,more like they just guessed it and you dont't expect it from DIV2B level problem.

      Btw were you 100% sure that your code will get AC and not get TLE verdict?

      • »
        »
        »
        »
        3 years ago, # ^ |
          Vote: I like it +3 Vote: I do not like it

        yes i was 100% sure . I calculate 9! and used similar to pigeonhole principle to prove it .

      • »
        »
        »
        »
        3 years ago, # ^ |
          Vote: I like it 0 Vote: I do not like it

        Well I was sure, but again who knows about such a strict time complexity.

        I checked we would get an answer in max 2520 iteration since 5*7*8*9 would include all the numbers in it. But again instead of using 2520 I used 3000 which sadly made me cost -167 rating :(

  • »
    »
    3 years ago, # ^ |
      Vote: I like it +3 Vote: I do not like it

    Same bruh.... it was only after I saw the brute force implementations that I realized that only a maximum of 2520 numbers needed to be checked. :") I should've moved on to C. :"(

  • »
    »
    3 years ago, # ^ |
      Vote: I like it +1 Vote: I do not like it

    The lcm of numbers from 1to9 is 2520 so it does not take more than 2520 for each test case if one does by simply increasing n and checking its fair or not

  • »
    »
    3 years ago, # ^ |
      Vote: I like it 0 Vote: I do not like it

    I was worried as well, but i've tried generating several cases and noticed that the number of iterations would always be pretty small, hence a brute force would pass.

  • »
    »
    3 years ago, # ^ |
    Rev. 3   Vote: I like it +1 Vote: I do not like it

    LCM of first 9 natural numbers is 2520. So brute force will work.

»
3 years ago, # |
  Vote: I like it +24 Vote: I do not like it

Solved A, B , D in last 10 minutes it was thrilling experience.

»
3 years ago, # |
  Vote: I like it 0 Vote: I do not like it

Found Div2D to be not that difficult. Don't know why so fewer solutions.

»
3 years ago, # |
  Vote: I like it 0 Vote: I do not like it

I started 1hr late, solved A and B in <20mins and then lost hope after C and then went to play chess. Does C require some advanced data structure or algorithm?

  • »
    »
    3 years ago, # ^ |
      Vote: I like it 0 Vote: I do not like it

    I don't think it requires some advanced shit. I think it's just something simple that we did not quite figure out.

»
3 years ago, # |
  Vote: I like it -137 Vote: I do not like it

why do you use 1e9+7 in D and 998... in E? congratulations, you have trolled me. I hope your problemsetting career has ended today.

  • »
    »
    3 years ago, # ^ |
      Vote: I like it +54 Vote: I do not like it

    Congratulations for not copypasting modulos.

    • »
      »
      »
      3 years ago, # ^ |
        Vote: I like it +19 Vote: I do not like it

      There should have been an example testcase for D which checks for the correct modulo.

      • »
        »
        »
        »
        3 years ago, # ^ |
          Vote: I like it +33 Vote: I do not like it

        Some testers noticed that but we were short on time and I didn't want to change anything. Definitely a thing to consider when problemsetting.

      • »
        »
        »
        »
        3 years ago, # ^ |
          Vote: I like it 0 Vote: I do not like it

        You can't really give big tests in samples.

        • »
          »
          »
          »
          »
          3 years ago, # ^ |
            Vote: I like it 0 Vote: I do not like it

          Actually you can, as a downloadable file.

    • »
      »
      »
      3 years ago, # ^ |
        Vote: I like it -26 Vote: I do not like it

      i was low on time after coding D so i forgot to recheck the modulo...

      • »
        »
        »
        »
        3 years ago, # ^ |
          Vote: I like it +40 Vote: I do not like it

        You're not supposed to "recheck". You're supposed to copy-paste. If you did that, you'd have more time too.

  • »
    »
    3 years ago, # ^ |
    Rev. 3   Vote: I like it +45 Vote: I do not like it

    I should've used Zashikhin prime. I'm deeply sorry for your disappointment which I believe is immeasurable.

  • »
    »
    3 years ago, # ^ |
      Vote: I like it +40 Vote: I do not like it
    • »
      »
      »
      3 years ago, # ^ |
        Vote: I like it -11 Vote: I do not like it

      unfortunately, this is another case because I haven't used any templates

  • »
    »
    3 years ago, # ^ |
      Vote: I like it +17 Vote: I do not like it

    Do you also ignore other parts of statements when solve? I wouldn't write it in this way if you weren't so aggressive. You should try to be more polite

    • »
      »
      »
      3 years ago, # ^ |
        Vote: I like it -37 Vote: I do not like it

      Do you also ignore other parts of statements when solve?

      Tell it to Errichto (comment)

    • »
      »
      »
      3 years ago, # ^ |
        Vote: I like it -27 Vote: I do not like it

      And if I politely asked, "why do you use 1e9+7 in D and 998... in E?", would you apologize?

      • »
        »
        »
        »
        3 years ago, # ^ |
          Vote: I like it +33 Vote: I do not like it

        You impolitely hoped that the authors' problem setting career has ended today. I agree that it would be better to use the same modulo in both problems. I could apologize before someone else who is not so toxic

        • »
          »
          »
          »
          »
          3 years ago, # ^ |
            Vote: I like it +38 Vote: I do not like it

          Ok thank you for the answer. Sorry for being impolite.

          • »
            »
            »
            »
            »
            »
            3 years ago, # ^ |
              Vote: I like it +20 Vote: I do not like it

            And I'm sorry for such inconvenience. Next time I'll pay more attention to it

          • »
            »
            »
            »
            »
            »
            3 years ago, # ^ |
              Vote: I like it 0 Vote: I do not like it

            No worries, man. Just funny to see you complaining about modulos.

»
3 years ago, # |
  Vote: I like it 0 Vote: I do not like it

My solution to D1C passed the 21 pretests but I found a NullPointerException hack right after contest ended :'(

»
3 years ago, # |
  Vote: I like it +14 Vote: I do not like it

Second day in a row with E<D<C XD

  • »
    »
    3 years ago, # ^ |
      Vote: I like it +5 Vote: I do not like it

    I found C pretty easy. The last 2 signs obviously have to be + and -, but then for any string, we can always proceed from the last operation and "merge" a sign into the next sign if they're different, so that lets us turn any sequence of — to one -, any sequence of + (except the last, which is fine here) to +, and when we're left with +-+-+, that can be reduced to + as well. The rest is some careful implementation.

»
3 years ago, # |
  Vote: I like it +5 Vote: I do not like it

Can anyone prove why brute force works in B? I calculated such numbers upto 10, 000 only to find a pattern!

  • »
    »
    3 years ago, # ^ |
      Vote: I like it +6 Vote: I do not like it

    LCM of all digits from 1-9 is 2520. So max 2520 iterations

  • »
    »
    3 years ago, # ^ |
      Vote: I like it -6 Vote: I do not like it

    Numbers that divide all possible digits occur at most every 9! numbers, which is 300k

»
3 years ago, # |
  Vote: I like it 0 Vote: I do not like it

In DIV2 C did we have to count the no. of cycles?

»
3 years ago, # |
Rev. 2   Vote: I like it 0 Vote: I do not like it

Hi . This contest was not designed like the previous contests because until the second question the questions were designed at the ideal level, but from the third question onwards the level of questions was very high and this was really a big weakness

»
3 years ago, # |
Rev. 2   Vote: I like it +20 Vote: I do not like it

I read there are solutions to problem E that don't utilize the fact that the nimber is at most $$$\sqrt{M}$$$, and works in $$$O(N\log{N})$$$. How do those solutions work?

  • »
    »
    3 years ago, # ^ |
      Vote: I like it +150 Vote: I do not like it

    Suppose that all Grundy numbers are in the range $$$[0, 2^d)$$$. Then, let $$$c_i$$$ be the number of vertices with Grundy number $$$i$$$, by definition, all $$$c_i$$$'s are nonnegative integer and their sum is $$$n$$$. Let $$$p_{k, i}$$$ be the probability that after $$$k$$$ steps of the first type the current Grundy number is $$$i$$$ (including the fact that $$$k$$$ steps may not even happen, so $$$p_{k, i}$$$ go to zero as $$$k$$$ increases). Then, we have a very simple formula: $$$p_{0, 0} = 1$$$, $$$p_{0, i} = 0$$$ for $$$i \neq 0$$$ and $$$p_{k + 1, i} = \sum\limits_{j=0}^{2^d - 1} \dfrac{p_{k, i} c_{i \oplus j}}{n + 1}$$$.

    In other words, $$$p_{k + 1} = (p_k \cdot c) / (n + 1)$$$, where by $$$\cdot$$$ I mean the Hadamard product of vectors. Because $$$p_0 = 1$$$, we get $$$p_k = c^k / (n + 1)^k$$$ (again, $$$c^k$$$ here means the $$$k$$$-th Hadamard power of $$$c$$$). Hence, the probability to end with Grundy number $$$0$$$ is the $$$0$$$-th coefficient of $$$\dfrac{1}{n+1} \sum\limits_{k=0}^{+\infty} \dfrac{c^k}{(n+1)^k}$$$. Indeed, to finish, we need to make $$$k$$$ steps of the first type (summands on the right) and then a step of the second type (multiplier on the left) for some $$$k$$$.

    Now, we can find the Hadamard transform $$$H(c)$$$ of $$$c$$$. Because Hadamard transform is linear
    ($$$H(\alpha f + \beta g) = \alpha H(f) + \beta H(g)$$$, if $$$\alpha$$$ and $$$\beta$$$ are numbers) and multiplicative ($$$H(fg) = H(f) H(g)$$$), we can get the coefficients of $$$H \left (\dfrac{1}{n+1} \sum\limits_{k=0}^{+\infty} \dfrac{c^k}{(n+1)^k} \right)$$$ just by replacing each coefficient $$$x$$$ of $$$H(c)$$$ by $$$\dfrac{1}{n+1} \sum\limits_{k=0}^{+\infty} \dfrac{x^k}{(n+1)^k} = \dfrac{1}{n+1} \cdot \dfrac{1}{1 - x/(n+1)}$$$.

    Finally, just apply inverse Hadamard transform to $$$H \left (\dfrac{1}{n+1} \sum\limits_{k=0}^{+\infty} \dfrac{c^k}{(n+1)^k} \right)$$$ that we just found. The probability of Bob's win is the $$$0$$$-th coefficent of the result.

    There are no issues with division by $$$0$$$ here: because $$$c_i$$$'s are nonnegative integers with sum $$$n$$$, the coefficients of $$$H(c)$$$ are integers from the range $$$[-n, +n]$$$. Hence, $$$1 - x/(n+1)$$$ can't be $$$0$$$ modulo $$$998244353$$$, because otherwise $$$n + 1$$$ and $$$x$$$ are equal modulo $$$998244353$$$, meaning that $$$998244353 \leqslant 2n + 1$$$. In fact, this solution proves that there are no bad tests (tests, where the denominator of the answer is divisible by $$$998244353$$$): there are no bad tests exactly because there are no issues with division by $$$0$$$ in this solution.

    This solution works in $$$O(n + d \cdot 2^d)$$$, if the input is just $$$n$$$ numbers from the range $$$[0, 2^d)$$$.

    • »
      »
      »
      3 years ago, # ^ |
      Rev. 3   Vote: I like it +42 Vote: I do not like it

      It's not an improvement on complexity but you can in fact save yourself the inverse transform, since the sum of all coefficients in the forward transform is $$$2^d$$$ times the $$$0$$$-th coefficient in the initial vector (every other coefficient cancels out).

    • »
      »
      »
      3 years ago, # ^ |
        Vote: I like it -82 Vote: I do not like it

      This is easier. Consider the string as sequence of numbers 2^(s[i]-'a'). Last two numbers always will wid fixed signs: s[n-1] is positive and s[n-2] is negative. Other numbers can be with any signs. There are 2^(n-2) ways to distribute signs, but it's possible to find the desired distribution by the binary search principle. Sort the array of n-2 numbers by descending, then iterate over it. Initially all signs are positive. For each number find out, whether you have to change the sign of this number. This is necessary only if and only if the sum of all n numbers after changing remains greater or equal to t. If after iterating this sum is equal to t answer is Yes

      • »
        »
        »
        »
        3 years ago, # ^ |
          Vote: I like it -11 Vote: I do not like it

        Why don't you like my approach???

        • »
          »
          »
          »
          »
          3 years ago, # ^ |
            Vote: I like it +23 Vote: I do not like it

          You are answering for Div2E whereas the above discussion is for Div1E.

          • »
            »
            »
            »
            »
            »
            3 years ago, # ^ |
              Vote: I like it 0 Vote: I do not like it

            This problems have same letters, I didn’t understand. But 9 contribution points cannot be returned

            • »
              »
              »
              »
              »
              »
              »
              3 years ago, # ^ |
                Vote: I like it +10 Vote: I do not like it

              contribution points are also absolutely irrelevant

              • »
                »
                »
                »
                »
                »
                »
                »
                3 years ago, # ^ |
                  Vote: I like it 0 Vote: I do not like it

                It's still a shame that the minus dirts my profile. It's not beautiful!

              • »
                »
                »
                »
                »
                »
                »
                »
                3 years ago, # ^ |
                Rev. 2   Vote: I like it 0 Vote: I do not like it

                In past I thought that contribution is how much money are donated by him

                (I still bad know English, I'm Russian. Fixed me if.)

    • »
      »
      »
      3 years ago, # ^ |
        Vote: I like it -38 Vote: I do not like it

      I was very close to this solution during the contest but I didn't know about the linearity property of Hadamard Transform, which is why I couldn't proceed further. I have read a few articles on FWHT(including serbanalogy's blog) but never saw this property anywhere, can you suggest some source where I can learn more Hadamard Transform and its properties?

      Thanks a lot.

»
3 years ago, # |
  Vote: I like it +26 Vote: I do not like it

I hate D1D...

»
3 years ago, # |
  Vote: I like it +6 Vote: I do not like it

Can anyone help explain the idea of D2D? Thanks!

»
3 years ago, # |
Rev. 4   Vote: I like it 0 Vote: I do not like it

In today's Div2 ~ C problem: // after contest

  • I first precalculated number of rooks in each row and collumn.
  • Then I took a queue and put the numbers in which row and collumn both has no rooks
  • Then I cheked m roocks if they are in correct place or can be sent to main diagonal by one move using a mark array and precalculated row-collumn counters.
  • Then If I am unable to put rook in less then 2 moves, I poped a number from the queue and puted that rook in the poped position and marked that position accordingly.
  • Thus I got the ans

My code's link : https://codeforces.com/contest/1465/submission/101896978

As far as I think my complexity is O(3*m) => O(n) But I got TLE can anyone explain me why it got TLE

  • »
    »
    3 years ago, # ^ |
      Vote: I like it 0 Vote: I do not like it

    You can use heading little shorter .I thought you were giving solution .

    It's because inner for loop can run 'n' times in worst case thus m*n complexity .

»
3 years ago, # |
  Vote: I like it +37 Vote: I do not like it

»
3 years ago, # |
  Vote: I like it +5 Vote: I do not like it

Am I the only one solve D2C without modeling it as graph and write very long and stupid code 101886029?

»
3 years ago, # |
  Vote: I like it -40 Vote: I do not like it

For Problem D (div.2) Greedy Solution WA test case 9: Dude wtf was with that D problem? I figured I would start off the round by solving D first since it would be 6 problems D should have been solvable. Anyway I read it and I figured if I went greedy it would work since for any test case that I could come up with greedy solution worked. When I say greedy what I did was from left to right when meeting a '?' I know the '1's and '0's before (two counters) and after (this can be done with a sum array from right to left) so I can figure which one is better to put. Can anyone please give me a test case where this doesn't work? I was getting WA in test 9 with greedy solution. Also for the cases where I would get the same cost I went recursively and tried both solutions to see which would give the best answer. Again I did not get TLE but a WA in test case 9. So please somebody give me a test case now that the contest is over. Also let's say greedy doesn't work, what kind of a DP solution would work, like I just need a complexity? Though I don't think a DP solution would work either. This problem must have the need of some really sophisticated data-structure/algorithm combination like Treaps with matrix exponentiation or some. But if you are gonna say 6 problems then make D at least solvable. Look at how many people solved C and how many solved D it's insane. Oh I can see why now... it's because they mostly used orange and red testers. Dude like if you are orange you know every algorithm known to man and every technique you have it already memorized. Competitive programming started ageing like chess smh.

  • »
    »
    3 years ago, # ^ |
      Vote: I like it 0 Vote: I do not like it

    If x>y, all ? will filled by one of sequences like 11...100...0, from 000..00 to 111..11. In the other case, iterate over all sequences like 00...011...1

»
3 years ago, # |
Rev. 2   Vote: I like it +3 Vote: I do not like it

my code for div2 C is ans=m, decrease if x==y, increase if a cycle is found. my solution solves all test cases suggested in the comment section. and still WA on test case 5. help pls :) Edit: found my mistake, got AC.

»
3 years ago, # |
  Vote: I like it 0 Vote: I do not like it

Can anyone explain div2D .Thanks

  • »
    »
    3 years ago, # ^ |
      Vote: I like it +12 Vote: I do not like it

    Consider all ? positions. If x>y, in the optimally case all the positions with ? filled by sequence like 11...100...0. Iterate over all possible sequences beginning a sequence with all zeroes. Next sequence is 100..0 then 1100..0 and etc. until sequence with all ones.

    In order to maintain the answer for each sequence, precalc for each position from 0 to n, number of 0 and number of 1 to the left and to the right of this position. While iterating the sequences you recalc the numbers of 0 and 1 to the left after each position with ?

    If x<=y, iterate over all sequences from the other side: 0..000, 0..001, 0..011, ..., 1..111 and recalc the numbers of 0 and 1 to the right after each position with ?

»
3 years ago, # |
  Vote: I like it 0 Vote: I do not like it

why some people are getting TLE in B ?

  • »
    »
    3 years ago, # ^ |
    Rev. 2   Vote: I like it 0 Vote: I do not like it

    I saw some of them use unordered map, i believe it has more constant factor(not sure), therefore failing the 2 sec time limit.

»
3 years ago, # |
  Vote: I like it +9 Vote: I do not like it

Why was there so weak pretests in B?

  • »
    »
    3 years ago, # ^ |
    Rev. 3   Vote: I like it -8 Vote: I do not like it

    If you mean that actually brute force isn't acceptable, then I will tell you that it can be proved it's acceptable

  • »
    »
    3 years ago, # ^ |
      Vote: I like it +11 Vote: I do not like it

    pretests are not weak, the time limit is too strict :(

»
3 years ago, # |
  Vote: I like it +13 Vote: I do not like it

1000 TLEs for problem B :))

  • »
    »
    3 years ago, # ^ |
    Rev. 2   Vote: I like it +20 Vote: I do not like it

    I think you should make the test set to more simple and rejudge. 1000 points to such is rationable.

    • »
      »
      »
      3 years ago, # ^ |
        Vote: I like it +11 Vote: I do not like it

      A strategy to divide n by each digit just once, but adding a small log(n) factor gives TLE. come on!!

  • »
    »
    3 years ago, # ^ |
      Vote: I like it 0 Vote: I do not like it

    It was more than 1000 :( image

    image

    • »
      »
      »
      3 years ago, # ^ |
        Vote: I like it -10 Vote: I do not like it

      And I am one of those people. This contest ruined my sleep. XD. Gonna practice some questions.

»
3 years ago, # |
Rev. 2   Vote: I like it +18 Vote: I do not like it

I got TLE in Div2 B. I used the obvious iterative approach i.e. keep incrementing value until a value is encountered which satisfies the condition.

The only possible reason for TLE I reckon is I used maps to store frequency ( occurrence ) of each digit.

Why such strict time-limit? :| This is really frustrating, even if time limit was INTENDED to be strict, why were the pretests weak? Why so much intricate optimizations were expected in div2B? 101865684 P.S. I am losing 160 points today!

  • »
    »
    3 years ago, # ^ |
    Rev. 2   Vote: I like it +3 Vote: I do not like it

    Yeah that's the reason. I used set and got TLE too :/

  • »
    »
    3 years ago, # ^ |
      Vote: I like it +4 Vote: I do not like it

    Yes. anyone who has added a log factor has a TLE. I dont see the point of such tight limits.

  • »
    »
    3 years ago, # ^ |
      Vote: I like it +1 Vote: I do not like it

    I also think it is not reasonalbe to fail. Because we only want to store 9 digits in unordered_map, there is even not much collision for hashing. That strict time limit is meaningless.

    • »
      »
      »
      3 years ago, # ^ |
        Vote: I like it +3 Vote: I do not like it

      Agreed. anta.baka I am not being rude but I'd genuinely like to know, from experienced coders and problem setters about their views on the FSTs of problem B.

      • »
        »
        »
        »
        3 years ago, # ^ |
          Vote: I like it 0 Vote: I do not like it

        I personally didn't expect FSTs. T * LCM * log sounds good in theory.

        • »
          »
          »
          »
          »
          3 years ago, # ^ |
            Vote: I like it +6 Vote: I do not like it

          Sorry it is T*LCM*18*LOG SO 1000*2520*18. Anything extra to that will be costly. 18 can not be ignored as it is too close to TL

»
3 years ago, # |
  Vote: I like it +25 Vote: I do not like it

i think problem B is such a bad problem for a contest.

»
3 years ago, # |
  Vote: I like it +1 Vote: I do not like it

Please Check problem B , it is bruteforce i agree but looking at c++ submissions they are getting accepted with fast i/o. Java solutions should be given consideration in such problems.

»
3 years ago, # |
Rev. 3   Vote: I like it -15 Vote: I do not like it

I was supposed to get +73 (and get my all-time high), but after system tests for B failed -23. Such a pity that 1000 other people failed system tests. A disgrace.

  • »
    »
    3 years ago, # ^ |
      Vote: I like it 0 Vote: I do not like it

    Hey, how were you able to determine these +73 and -23 numbers. Can you please tell where I can find them.

    • »
      »
      »
      3 years ago, # ^ |
        Vote: I like it 0 Vote: I do not like it
    • »
      »
      »
      3 years ago, # ^ |
        Vote: I like it 0 Vote: I do not like it

      download the extension on chrome of Codeforces predictor or use codeforces live bot . BTW Todays contest was horrible for me , I solved C just after 2 minutes of contest ending and thus it is counted as upsolved (which is not wrong), but after this I Got a TLE in B as well , Due to a small log factor , log factor of 10 :(

»
3 years ago, # |
Rev. 2   Vote: I like it +4 Vote: I do not like it

Worst Problem B I ever came across. Problem B is not equally good for all the available programming languages

»
3 years ago, # |
  Vote: I like it +2 Vote: I do not like it

Interesting to see that all but one Python 3 solutions TLEd in system testing for Div 2 B.

The one that passed test 11 (system), used an LRU cache. Test 11 was all the same number. 101880982

  • »
    »
    3 years ago, # ^ |
      Vote: I like it +5 Vote: I do not like it

    That is not acceptable, problem-writers.

»
3 years ago, # |
  Vote: I like it +15 Vote: I do not like it

optimizeForce not codeforce

»
3 years ago, # |
  Vote: I like it +18 Vote: I do not like it

There should be a re-evaluation for B anta.baka neckbotov

  • »
    »
    3 years ago, # ^ |
      Vote: I like it -12 Vote: I do not like it

    Yes, Python solutions with the same logic as C++ solutions should pass.

    • »
      »
      »
      3 years ago, # ^ |
        Vote: I like it +6 Vote: I do not like it

      Come on. There are a lots of problems that if you want to get AC with python, time limit should be 30 second.

»
3 years ago, # |
Rev. 2   Vote: I like it +13 Vote: I do not like it

People with same logic for B, someone getting TLE, someone getting AC. I've seen adhocforces, mathforces, but now optimizeforces ?

  • »
    »
    3 years ago, # ^ |
      Vote: I like it +4 Vote: I do not like it

    True, also almost all solutions in python failed B! B needs re-evaluation!!!

    • »
      »
      »
      3 years ago, # ^ |
        Vote: I like it +3 Vote: I do not like it

      I've seen such solutions in Python itself, where both have same logic, but one is giving TLE and the other is giving AC. The only difference was:- one was using list, one was using string.

  • »
    »
    3 years ago, # ^ |
      Vote: I like it +14 Vote: I do not like it

    But it is not optimization . How can you know your code will get FST after getting pretest passed in 125 ms where limit is 2000 ms . Why will u optimise ur solution in this case?

    • »
      »
      »
      3 years ago, # ^ |
        Vote: I like it +1 Vote: I do not like it

      Yes you are right, I would say that the Testcases were not appropriate.

  • »
    »
    3 years ago, # ^ |
      Vote: I like it +1 Vote: I do not like it

    For example see this two submuissions. AC TLE

»
3 years ago, # |
  Vote: I like it 0 Vote: I do not like it

After having 20+ testers, it is very sad to see there are 1000+ system test fails on problem B (mostly for python3). It is advisable to keep at least one python coder as your tester

»
3 years ago, # |
Rev. 2   Vote: I like it +6 Vote: I do not like it

Why do I get TLE on main test cases for problem B? What the hell man! I don't think this was supposed to happen

Edit: my solution is cpp !!

»
3 years ago, # |
Rev. 4   Vote: I like it -34 Vote: I do not like it

[deleted]

»
3 years ago, # |
Rev. 5   Vote: I like it 0 Vote: I do not like it

With this problem B, I came from cyan to almost gray in one week and the next contest is in 10 days :(

  • »
    »
    3 years ago, # ^ |
      Vote: I like it +3 Vote: I do not like it

    start a 9-day vigorous practice session, hope you'll bring out the fire in good bye 2020!

»
3 years ago, # |
  Vote: I like it 0 Vote: I do not like it

My rating prediction just went from +100 to -100 only because of storing digits xD

»
3 years ago, # |
  Vote: I like it -17 Vote: I do not like it

I can't understand people who use python for competitive programming. If you use python for competitive programming, so you won't become good in it.

  • »
    »
    3 years ago, # ^ |
      Vote: I like it +8 Vote: I do not like it

    Ever heard of pajengod bruh?

  • »
    »
    3 years ago, # ^ |
      Vote: I like it +6 Vote: I do not like it

    Most people do competitive programming to learn a language and to get better at data structures and algorithms. I use Python because I can, what is the meaning of "If you use python for competitive programming, so you won't become good in it"? What does a language have to do with algorithms and logic?

»
3 years ago, # |
Rev. 4   Vote: I like it -14 Vote: I do not like it

got tle because of storing digits...

  • »
    »
    3 years ago, # ^ |
      Vote: I like it 0 Vote: I do not like it

    same I used set to store the digits and TLED on test case 11 but pretest were not much strong.

»
3 years ago, # |
  Vote: I like it +6 Vote: I do not like it

This Contest went Tough for me but Contests like these are real tester of our skills like patience , how good we are in making comeback after slow start ,implementation . Overall it was a great contest and we will surely gain a lot of things (keeping aside ratings ) for long run

»
3 years ago, # |
  Vote: I like it +6 Vote: I do not like it

Why Ternary search gave AC for problem D div2/B div1.

»
3 years ago, # |
Rev. 4   Vote: I like it +4 Vote: I do not like it

Why Div 2 B rejudge on improved time limits would be fair.

  1. A large number of submissions times out on system test (excl. C++) which are of optimal time complexities.

  2. Had it been a case of TLE on pre-tests, (or even close to time limit), one have the opportunity to re-implement in faster languages. (I saw 93ms and thought it'd be fine)

  3. Languages like Python is not an odd choice for the problem, as it particularly helps iterating over digits without divide and modulo over 10s.

  • »
    »
    3 years ago, # ^ |
    Rev. 2   Vote: I like it 0 Vote: I do not like it

    I totally agree with you I was a bit sceptical at first but when I saw that it passed all the pretests so efficiently I didn't think it needed any optimisation at all. Suppose I'd have got something above maybe 1 seconds I would've tried to optimise it or would've thought about my approach again. But those silly pretests kept us clueless. In such cases why to even bother giving the pretests. Just don't tell us anything and let us match the answers just from the example given in the problem T-T

»
3 years ago, # |
  Vote: I like it 0 Vote: I do not like it

Can someone tell why i am getting wrong answer in test case 3 in system testing for div2 B my code :- 101899785

  • »
    »
    3 years ago, # ^ |
      Vote: I like it 0 Vote: I do not like it

    I think it's better if you explain your reasoning/logic as well.

    • »
      »
      »
      3 years ago, # ^ |
        Vote: I like it 0 Vote: I do not like it

      I have counted individually digits for 2,4,8 --> max of three for 6 ---> 6 for 3,9 ---> max of two for 5 or 7 ---> 5 or 7

      then checked if it exits and divides the no. , if it divides then break else increment

      • »
        »
        »
        »
        3 years ago, # ^ |
          Vote: I like it +3 Vote: I do not like it

        Your code is a bit hard to follow. Try not to name variables as 'ttt','se' etc. Why do you check if each digit of 'n'(given number) is divisible by every digit?

»
3 years ago, # |
Rev. 2   Vote: I like it +3 Vote: I do not like it

I hope, you will not do unfair with us by making this rated. Atleast there should be increase of TL and a rejudge.

  • »
    »
    3 years ago, # ^ |
      Vote: I like it 0 Vote: I do not like it

    DIV2 B was just bruteforce ,and if they just want bruteforce to pass then why so strict time limit. Using map gives TLE while withot map AC. I know , Its my mistake that I should have taken the complexity of map implementation into account, but Whats the point of making those submissions System Fail. Anyways, Got to know today, "Use map very Carefully"!

»
3 years ago, # |
  Vote: I like it +2 Vote: I do not like it

Pretty good contest. First two questions boosted confidence. Rest questions were really good. Good job setters :)

  • »
    »
    3 years ago, # ^ |
      Vote: I like it -17 Vote: I do not like it

    Good contest when 1000 people failed system tests for B? Think again.

    • »
      »
      »
      3 years ago, # ^ |
      Rev. 2   Vote: I like it 0 Vote: I do not like it

      Maybe we should not blame the author, because that test case also not in pretest. They also don't expect that. But hope they can give a reasonable response

      • »
        »
        »
        »
        3 years ago, # ^ |
          Vote: I like it 0 Vote: I do not like it

        1) I never blamed the authors in my response? 2) I never said this was a bad contest in my response; I simply said it’s undeserving of being called “good” when >1000 participants failed system tests. Only one Python code passed system tests. 3) In Div1E and Div2B submitting the exact same code again sometimes give AC. The time limit was far too tight.

      • »
        »
        »
        »
        3 years ago, # ^ |
          Vote: I like it 0 Vote: I do not like it

        Atleast ,they could have designed a single pretest to check that time limit over submissions during the contest rather than making more than 1k submission fail in just a bruteforce problem!

        • »
          »
          »
          »
          »
          3 years ago, # ^ |
            Vote: I like it 0 Vote: I do not like it

          Or maybe a pretest that takes more execution time like more than 1 second. So that people could get a hint that it might fail.

          • »
            »
            »
            »
            »
            »
            3 years ago, # ^ |
              Vote: I like it 0 Vote: I do not like it

            Yeah thats the points I was trying to make. Thanks For understanding.

    • »
      »
      »
      3 years ago, # ^ |
        Vote: I like it 0 Vote: I do not like it

      It isn't that much about good or bad contest. I solved 3 questions and found all of them to be quite interesting. But the problem here is that pretests should be set more carefully. What is even the use of pretests then if isn't able to provide any useful feedback. Like maybe not fail such code in pretests but at least have large execution time (under the constraints). Although this was still a lesson for me :)

      • »
        »
        »
        »
        3 years ago, # ^ |
          Vote: I like it 0 Vote: I do not like it

        Can you tell me what's the point of using a map and how problem b is interesting?

        • »
          »
          »
          »
          »
          3 years ago, # ^ |
            Vote: I like it 0 Vote: I do not like it

          What I found interesting is how the concept of LCM got used here to know that what is the max increment under which we will surely find our answer.

»
3 years ago, # |
  Vote: I like it +2 Vote: I do not like it

my exact same code for div2B gave Tle on system testing but now it is accepted why?

  • »
    »
    3 years ago, # ^ |
    Rev. 4   Vote: I like it 0 Vote: I do not like it

    Dude your EXACTLY SAME CODE is not EXACT. Just see my recent submission I copied same code of yours and it's showing TLE. So, don't lie at least My submission(Same code as yours) . Your code

    • »
      »
      »
      3 years ago, # ^ |
      Rev. 2   Vote: I like it +3 Vote: I do not like it

      just see the solution which was accepted for 1996ms(this one is exactly same) not the one of 1560ms. I just tried it and it's accepted again. Edit : also you tried using c++17, try it by c++14 it will get accepted

  • »
    »
    3 years ago, # ^ |
      Vote: I like it 0 Vote: I do not like it

    It's really sad man but even your AC submission passed by 4 ms. lol

»
3 years ago, # |
Rev. 2   Vote: I like it +16 Vote: I do not like it

In Div1 E, I passed pretest on contest, but I failed the same pretest when systest running. After systest completed, I submitted exactly same code but it accepted!

I am really sad. If I were more lucky, I would pass Div1 E......

»
3 years ago, # |
Rev. 3   Vote: I like it 0 Vote: I do not like it

My submission for Div2-B on contest was TLE on system test , but after system test I submit same code and could get AC. The standard of AC become ambiguous.

  • »
    »
    3 years ago, # ^ |
      Vote: I like it +3 Vote: I do not like it

    i am also facing the same issue, the one i did during contest is still showing pretests passed and the one i submitted (same code) again , got accepted.

»
3 years ago, # |
  Vote: I like it -16 Vote: I do not like it

If you got TLE on B that's your fault for not analyzing the complexity of your solution, especially considering how many people that 'solved' it didn't know what was going on.

  • »
    »
    3 years ago, # ^ |
      Vote: I like it 0 Vote: I do not like it

    then wats the mistake of people using python??? is it fair

    • »
      »
      »
      3 years ago, # ^ |
        Vote: I like it +6 Vote: I do not like it

      Yes? If your know your solution makes around $$$2500 \cdot 1000 \cdot 20 = 5 \cdot 10^7$$$ operations in the worst case you know that python will be too slow.

      • »
        »
        »
        »
        3 years ago, # ^ |
          Vote: I like it 0 Vote: I do not like it

        Even my solution failed when it was making around 5*10^7*3 (3 for log factor) and even if I remove that 3 , i.e. use unordered set it is still giving TLE , I used C++

      • »
        »
        »
        »
        3 years ago, # ^ |
          Vote: I like it 0 Vote: I do not like it

        ohhh i got it they should learn c++ to solve this problem!!! now its fair

        • »
          »
          »
          »
          »
          3 years ago, # ^ |
            Vote: I like it +3 Vote: I do not like it

          Dude if you want to python which is such a damn slow language you should know that your just can't make that much operations

    • »
      »
      »
      3 years ago, # ^ |
        Vote: I like it +7 Vote: I do not like it

      1397B - Power Sequence In this problem, many C++ solutions were considered WA whereas many python solutions were considered AC which used the same logic just because of the fact that the overflow limits of Python are larger than those of C++. So, I don't think your morale should be down by this

  • »
    »
    3 years ago, # ^ |
    Rev. 2   Vote: I like it 0 Vote: I do not like it

    I also failed the tests for problem B. Which was because of a factor of log n. Right after I modified it to eliminate the log n factor it gave AC. Mine was in C++. Although I'm still kind of fine with what happened with C++ submissions. But it really sucks for those who gave the contest with Python.

»
3 years ago, # |
  Vote: I like it 0 Vote: I do not like it

Anyone did B with the use of string ?

»
3 years ago, # |
  Vote: I like it +13 Vote: I do not like it
I'm stupid
»
3 years ago, # |
  Vote: I like it 0 Vote: I do not like it

anta.baka If not for the C++ submissions. At least do something for the python submissions.

»
3 years ago, # |
  Vote: I like it +4 Vote: I do not like it

Nice contest

»
3 years ago, # |
  Vote: I like it 0 Vote: I do not like it

I wonder, why is there a huge gap between the number of participants who solved C and D? in two recent contests.

»
3 years ago, # |
Rev. 2   Vote: I like it 0 Vote: I do not like it

Hey, could anyone please tell me their approach for problem C? I thought about it for an hour or so but couldn't come up with a solution.

  • »
    »
    3 years ago, # ^ |
      Vote: I like it 0 Vote: I do not like it

    Some hints:

    1) initially ans = m 2) if we have a cycle => ans++ 3) if x[i] == y[i] => ans--

»
3 years ago, # |
  Vote: I like it +13 Vote: I do not like it

my div2B solution is still stuck at pretest passed.. later i submitted exact same code and it got accepted. rating for same is also not given[user:MikeMirzayanov] anta.baka

  • »
    »
    3 years ago, # ^ |
      Vote: I like it +74 Vote: I do not like it

    Hi, it is fixed now. But why do you use bold for the whole message?

    • »
      »
      »
      3 years ago, # ^ |
        Vote: I like it +58 Vote: I do not like it

      Maybe he wants the message to have the Headquarters title.

»
3 years ago, # |
  Vote: I like it +27 Vote: I do not like it

This contest makes me know that you should never give up halfway during a contest! Last night it was 0:30 a.m. here and I really wanted to quit the contest and sleep, but I didn't. And I managed to come up with the solution to C in the last 10 minutes, successfully implemented it in about 5 minutes and got AC! And finally I became international master ;)

  • »
    »
    3 years ago, # ^ |
      Vote: I like it +3 Vote: I do not like it

    I have come up solutions in last few minutes for many time,but usually I can't write the correct code in such a stressful situation.

»
3 years ago, # |
Rev. 2   Vote: I like it 0 Vote: I do not like it

Will there be any other contest before Good Bye 2020 or Not

»
3 years ago, # |
  Vote: I like it +3 Vote: I do not like it

Hello everyone, when will there be information about who made it to the Technocup final in the third qualifying round?

»
3 years ago, # |
  Vote: I like it -35 Vote: I do not like it

please change the colors normal MikeMirzayanov It is not fitting well for dark mode users for example:  ![ ](del1)