Again, low-level i/o C++.

Правка en8, от xsc, 2017-01-27 13:15:50

I decided to rewrite this post, previously has been deleted.

I know there a many of posts low-level i/o.

scanf/printf solves slowly i/o, partially, but not always.

Most generic usage i/o — is read and write integers, so I'll write about it without a hundred lines of source code.

1. Read integers.

For simplicity, all input file content loaded to a big buffer, and it will be parsed.


char in[1<<23] ; // a big buffer char const* o ; // pointer to buffer.

And for detecting end of buffer, put '\0' — terminating symbol to end of buffer ( as plain c-string).

Now loading the file:

void load(){  o = in;   in [   fread(in,  1,  sizeof(in ) - 4 ,  stdin ) ] = 0; }

fread - returns number of reading symbols, we just use this for put '\0' terminating symbol to end of buffer.

Reading a unsigned integer:

unsigned readUInt(){
      unsigned u = 0;
      
      while( *o && *o <= 32) ++o ; //  skip spaces
    
      while ( *o >='0' && *o <='9') u = (u << 3) + (u << 1) + (*o++ -'0');
      return u;
}

By default most implementations used u = u * 10 + (*o++ - '0'),
but u * 10 = u * 8 + u * 2 = (u << 3) + (u <<1) I don't know it gives speed, but with shifting the code become happy :)

Reading signed integer.

Some theory of signed integer representation, in most situation see here

-u == ~u + 1

There ~ — bitwise inverting.

And ~u == u ^ 0xFFFFFFFF or ~u == u ^ ~0

Let start writing method

    int readInt()
    {
         unsigned u = 0, s = 0; // s = 0, if integer positive, s = ~0 - if integer negative
         while(*o && *o <= 32)++o; // skip spaces
         
         if (*o == '-')s = ~0, ++o; else if (*o == '+') ++o; // determine sign
         while( *o >='0' && *o <= '9') u = (u << 3) + (u << 1) + (*o ++ - '0');

         return (u^s) + !!s; // ??????? : s = 0 :  (u^s) + !!s = (u^0) + !!0 = u + 0 = u, and
                             //           s = ~0:  (u^s) + !!s = (u ^ ~0) + !! ~0 = (u^0xFFFFFFFF) + 1 = ~u + 1 = -u
         
    }

How to use this complete?

#include <cstdio>

char const * o;
char in[1<<23];

void load(){ o = in ;  in [ fread(in,1,sizeof(in)-4,stdin)] = 0; }
unsigned readUInt(){
     unsigned u = 0;
     while(*o && *o <= 32)++o;
     while(*o >='0' && *o <='9') u = (u << 3) + (u << 1) + (*o++ -'0');
     return u;
}
int readInt(){
    unsigned u = 0, s = 0;
    while(*o && *o <= 32)++o;
    if (*o == '-') s = ~0, ++o; else if(*o == '+') ++o;
    while(*o >='0' && *o <='9') u = (u << 3) + (u << 1) + (*o++ - '0');

    return (u ^ s) + !!s;
}

int main()
{
     load();
     int n = readInt();
     int s = 0;
     for(int i= 0; i < n; ++i)s += readInt();

     printf("summa = %d\n", s);
     
     return 0;
}

Compare low-level i/o: 24139587 with std::cin , std::cout 24133798

Benchmark: read and write 10^6 numbers took 120~150 milliseconds where scanf/printf ~650 milliseconds.

for competetive programming this single method is enough for reading integers:

   typedef long long ll;
   typedef unsigned long long ull;

    ll  readInt(){
          ull u = 0 , s = 0;
          while(*o && *o <= 32)++o;
          if (*o == '-') s = ~s, ++o; else if (*o == '+') ++o;
          while(*o >='0' && *o<='9') u = (u << 3) + (u << 1) + (*o++ -'0');

          return (u ^ s) +!!s; 
    }

2. Writing integers.

There are need a big buffer and pointer, again.

typedef long long ll;
char out[1<<23];
char * w = out; // initialize with &out[0] - beginning of the buffer.

There a single writeInt method, arguments: integer u and serarator c .

// need to implement this method.
void writeInt( ll u, char separator); // u - integer, separator - will printed after the integer, most situations is space, or '\n'.

AND flush method, which we must call at the end of all operations.

// flush - must be called before end of program.
void flush(){  fwrite(out, 1, w - out, stdout); }

For implementing writeInt need temporary buffer :

void writeInt(ll u, char separator)
{
     char tmpbuf[20]; int i;
     if ( u < 0 ){ *w ++ = '-'; u = - u ; }
     i = 20;
     do tmpbuf[--i] = u % 10 + '0'; while(u/=10); // write last digits of u to tmpbuf from end to begin.
     
     // now write tmpbuf to out[] buffer from w pointer.
     do *w++ = tmpbuf[i++]; while(i < 20);

    // and separator
     *w++ = separator;
}

It's all.

------------------------------------------------------------------------------------------------------

UPD: Wrapper classes.

Let simplify all above codes.

typedef long long ll;
typedef unsigned long long ull;

char in[1<<23];
char out[1<<23];

//wrapper to reader
struct scanner
{
    char const* o;
    scanner(): o(in){ load(); }
    void load(){ in[ fread(in , 1, sizeof(in)- 4, stdin)] = 0; }
    ll readInt(){
        ull u = 0, s = 0;
        while(*o && *o <= 32)++o;
        if (*o == '-')s = ~s, ++o; else if (*o == '+')++o;
        while(*o >='0' && *o <='9') u = (u << 3) + (u << 1) + (*o++ - '0');
        return (u^s) + !!s;
    }
};

//wrapper to writer
struct writer
{
    char * w;
    writer(): w(out){}
   ~writer(){ flush();}
   void flush(){ if (w!=out){ fwrite(out,1,w-out,stdout); w = out; } } 
   void writeInt(ll u, char c){
        char t[20]; int i = 20; 
         if (u < 0){ *w++ = '-'; u = -u;}
        do t[--i] = u % 10 + '0'; while(u/=10);
        do *w++ = t[i++]; while(i < 20);
        *w++ = c;
   }
};


//A+B
int main()
{
    scanner sc;
    writer pw;
    pw.writeInt(sc.readInt() + sc.readInt(), '\n');
}

UPD-2 Reverse-Writer

Sometimes, needed restore answer from end to begin, for example shortest path in graph from source to target. Most solution is save answer to array, vector, and reverse it and print. But there exists another solution with reverse-writer.

Reverse-writer -is simple writes numbers to array from end to begin in reverse order.

Let code it

typedef long long ll;
typedef unsigned long long ull;

char out[1<<23];

struct reverse_writer
{
   char * w;
   reverse_writer(): w( out + sizeof(out) ){} // w - indicated end of  out[] array
   ~reverse_writer(){ flush(); }
   void flush(){  
      if (w != out + sizeof(out) ) 
          fwrite(w, 1, out + sizeof(out) - w, stdout), w = out + sizeof(out);
    }
   
   void writeInt(ll u, char c){
       *--w = c; // print separator at first
       (u < 0) ? (u = -u, c ='-') : c = '\0' ; // determine sign
       do *--w = u%10 + '0'; while(u/=10); // put digits 
       if(c)   *--w= c ;// write sign 
   }
};


// USAGE:

vi g[maxn];
int parent[maxn];
int n,m,source, target;
int main()
{
     scanner sc; 
     reverse_writer pw;
     
     n = sc.readInt(), m = sc.readInt(), source = sc.readInt(), target = sc.readInt();

      for(int i= 0; i<m;++i){ 
          int a = sc.readInt(), b = sc.readInt(); 
         g[a].push_back(b); g[b].push_back(a);
      }

      memset(parent, -1, sizeof(parent)); 
     dejkstra(source, target);

     int total = 0;  char c = '\n';
     for(int i = target ; i != -1; i = parent[i], ++total) 
               pw.writeInt( i , c), c = ' ';
     pw.writeInt(total, '\n');
}

GOoD lUck!

Теги c++, fast i/o

История

 
 
 
 
Правки
 
 
  Rev. Язык Кто Когда Δ Комментарий
en8 Английский xsc 2017-01-27 13:15:50 2 Tiny change: 'push_back(a); g[b].pu' -> 'push_back(b); g[b].pu'
en7 Английский xsc 2017-01-27 13:10:33 1700
en6 Английский xsc 2017-01-26 18:07:25 1254 Added wrapper classes
en5 Английский xsc 2017-01-26 03:26:19 95
en4 Английский xsc 2017-01-26 03:06:55 1321
en3 Английский xsc 2017-01-26 02:29:45 504
en2 Английский xsc 2017-01-26 02:19:17 6 Tiny change: 'a hundred of source' -> 'a hundred lines of source'
en1 Английский xsc 2017-01-26 02:14:27 3226 Initial revision (published)