Unnecessary Details: 1B — Spreadsheet

Правка en25, от jsgoller1, 2022-07-04 03:12:12

1B - Spreadsheet was extremely challenging for me; it took me over 2 hours to get AC. I didn't find the editorial helpful, and then when I went to see practice solutions from red/orange people, it made even less sense (they were basically copy/paste with minor variation):

Solution

I'll talk about each part of the problem itself and approaches/alternatives, and then explain how the above solution (henceforth "the solution") handles it. I'll go into unnecessary detail since I'm very new to CP/CF and would've wanted this level of detail myself.

Problem statement

Input: First line is an int representing the number of test cases. Each following line is a string of characters specifying a spreadsheet cell, in one of two formats:

  • "Excel": ^[A-Z]+[0-9]+\$ (e.g. BB352).
  • "RC": ^R[0-9]+C[0-9]+\$ (e.g. R253C55).

Output: For test case, we must output the same cell specified in the opposite format. Example:

2
R23C55
BC23

should output

BC23
R23C55

Constraints:

  • Between 1 and 10000 test cases (all valid in either format)
  • In each case, the row and column numbers are no larger than 1000000 (so each line is 16 chars at longest since we never exceed R1000000C1000000 / BDWGN1000000).

Approach

Our implementation needs to do 3 things:

  • Convert from Excel to RC
  • Convert from RC to Excel
  • Determine which format the input is in, and do the right conversion on it

The heart of this problem is a change of base; RC-format uses two base-10 numbers, whereas Excel uses one for rows and a quasi-base-26 character string for columns.

Determine format

Note that for RC format, we will always find a C after some numbers in the string, whereas with Excel we will never find any letters after numbers. We could use this as a test of format with something like:

Solution

The solution does this in a better way:

Solution

The string %*c%d%*c%d will match on the RC format, but not Excel; %*c matches on and throws away any non-numeric characters, whereas %d matches on numeric characters and stores them in the respective variable. For an RC string, R and C are thrown away but the numbers following them are stored in x and y (so (sscanf() will return 2). On an Excel string, this won't match so nothing is stored in x or y (and sscanf() will return 0).

Excel to RC conversion

This is the easier conversion, conceptually. We can copy the row portion and print it as-is. For the column portion, we have to convert from base-26 to base-10. A base-10 number represents addition of successive powers of 10, each times a constant: 12345 in base-10 means 5*(10^0) + 4*(10^1) + 3*(10^2) + 2*(10^3) + 1*(10^4). So for the column string, we can map each letter to a number (i.e. A=1, B=2, ... , Z=26) and then associate each with a power of 26. Consider RZA: A=1, Z=26, and R=18, so we can write it as 1*(26^0) + 26*(26^1) + 18*(26^2) = 12845.

We have a problem: C++ has no built-in for integer exponentiation. There are a couple workarounds. We could try writing one ourselves:

Solution

or

Solution

The iterative version is slightly faster (by a few ten-thousandths of a second on my machine, probably due to the time involved with stack frame creation/cleanup) but we have bigger problems to worry about. Using unsigned ints means we can't compute negative powers, but those are ruled out by the problem statement so again we don't care.

Another approach would be to use a hashtable for powers of 26 since the problem constraints mean we'll never compute 26^n for n > 4 (though this requires more code):

Solution

However, the solution does none of these:

Solution

Let's take this apart, starting with for(x=0,p=s;*p>64;++p). After sscanf() returns 0, x and y are uninitialized, so x is zeroed and will store the value of the column string as it's converted to base-10. We also set p to the first character in the string. On each iteration, we increment p (which will add 1 byte to the address) and then evaluate it.

Our termination condition is that the character p points to is less than 64; 65 is the ASCII code for A, so during each iteration of our loop p must point to a char that represents some letter from A-Z. The problem ensures each test case is a valid Excel or RC string, so while a test like *p>64 && *p < 91 would be more correct, it isn't necessary. When the loop ends, it will thus point to the first number in the string, i.e. the row portion of the string. We will then be able to print it directly, since it's already in base-10.

The next line is the most confusing: x=x*26+*p-64;. First, what does it actually do? Let's add parens to make order of operations explicit:

  1. Dereference: x*26+(*p)-64
  2. Multiplication: (x*26)+(*p)-64
  3. Add / sub, with L-to-R associativity: ((x*26)+(*p))-64

The entire result is stored in x repeatedly, so we can use substitution and write an entire loop as a single line. Using the previous example of converting RZA to 12845:

(((((((((0*26)+(82))-64)*26)+(90))-64)*26)+(65))-64)

then drop some redundant parens to get

((((0*26)+(82-64))*26+(90-64))*26+(65-64))
((((0)+(18))*26+(26))*26+(1))
((18*26+(26))*26+(1))
((468+26)*26)+1
12845

So we can see that this computes the right answer despite not using exponents, but why is it equivalent to our previous method using powers of 26? We can factor one into the other with a little high-school-level math:

((((0*26)+(82-64))*26+(90-64))*26+(65-64))
     ^------drop since it evaluates to 0
(((82-64)*26+(90-64))*26+(65-64))
                      ^--- distribute over inner expression
(82-64)*26^2 + (90-64)*26 + (65-64)*26^0
                                     ^---26^0=1, so (65-64)*26^0=(65-64)

So we know x will contain the now base-10 value of the column, and at the end of the loop p points at the first number of the column portion (already base-10), so all we have to do is print them with R and C, and we're done with the test case:

Solution

RC to Excel conversion

Normally, we can convert from a lower base to a higher one via successive division until we get 0; the remainder after each step are the characters in the new base, starting with the least significant. For example, convert base-10 12345 to hexidecimal (which will be 0x3039):

  12345 / 16 = 771    12345 % 16 = 9
    771 / 16 = 48       771 % 16 = 3
     48 / 16 = 3         48 % 16 = 0
      3 / 16 = 0          3 % 16 = 3

But this won't work for our Excel format with base 26 because of two quirks you might have noticed by now:

  • No 0 in Excel format
  • Off-by-one; Excel format treats A as the first symbol in the number system but uses A = 1. In decimal, 1 is the second character, after 0; so when n % 26 == 1 in our procedure, it really means "use the second character" but the format uses B for the second character.

To make this explicit, we can try doing the normal conversion for decimal 494, but we don't get the expected result "RZ":

   494 / 26 = 19    494 % 26 = 0   // ?; we have no letter for 0
    19 / 26 = 0      19 % 26 = 19  // S; A = 1, B = 2, ... , S = 19

We can correct both issues with two small changes:

  • If n % 26 == 0, emit "Z"
  • Whenever we emit Z, decrement the quotient by 1 before doing the next division.

Now converting 494 works correctly:

  494 / 26 = 19    494 % 26 = 0   // Z
   19 - 1 = 18
   18 / 26 = 0      18 % 26 = 18  // R; A = 1, B = 2, ... , R = 18

And other divisions do as well; decimal 1000000 converts to BDWGN:

  1000000 / 26 = 38461    1000000 % 26 = 14   // N
    38461 / 26 = 1479       38461 % 26 = 7    // G
     1479 / 26 = 56          1479 % 26 = 23   // W
       56 / 26 = 2             56 % 26 = 4    // D
        2 / 26 = 0              2 % 26 = 2    // B

The "decrement by 1 if we emit Z" is a bit confusing, but consider this: in decimal addition when we overflow a place with a multiple of the current place, we emit 0 and carry to the next number. E.g. in 17+13, 3+7=10, so we emit 0 and carry the 1 to the 10s place so we get 30. So a sort of opposite happens here; instead of overflowing and wrapping to 0, we emit our 26th character and subtract 1 from the next place.

However, the solution once again does something different:

Solution

The helper function g() handles converting the columns portion in y and emits it immediately, the main loop prints the rows part stored in x, which again requires no conversion. g() itself requires a bit of explanation; here it is expanded:

Solution

Note that g() does recursive division on t, the base-10 column value; our base case / terminating condition is t == 0 (remember that this is the termination condition of our original change-of-base procedure). Recall that the original procedure obtains the characters in the new base in reverse order. g() handles this by doing putchar() after the recursive call returns; this means that the first subcall to print a character will be the one on top of the call stack, i.e. the most significant character.

The actual calculation here differs from repeated division discussed above. Instead of only decrementing the quotient when we emit Z, we decrement after every division and then again before calculating which letter to use. However, note that the letter choice begins from 65 ('A'). Let's convert 12845, which results in RZA. Does this handle our Z / remainder 0 problem?

(12845-1) / 26 = 494   (12845-1) % 26 = 0    // 65 + 0 = 65,  'A' in ASCII
  (494-1) / 26 = 18      (494-1) % 26 = 25   // 65 + 25 = 90, 'Z' in ASCII
    (18-1 / 26) = 0       (18-1) % 26 = 17   // 65 + 17 = 82, 'R' in ASCII

It does! And observe what happens for 1000000 (when we aren't dealing with Z / remainder 0):

  1000000 / 26 = 38461    (1000000-1) % 26 = 13   // 65 + 13 = 78, N
(38461-1) / 26 = 1479       (38461-1) % 26 = 6    // 65 + 6 = 71,  G
 (1479-1) / 26 = 56          (1479-1) % 26 = 22   // 65 + 22 = 87, W
   (56-1) / 26 = 2             (56-1) % 26 = 3    // 65 + 3 = 68,  D
    (2-1) / 26 = 0              (2-1) % 26 = 1    // 65 + 1 = 66,  B

The actual integer quotient is unchanged, but all of the remainders are decremented. Thus adding the remainder to 65 instead of 64 is effectively undoing the subtraction, leaving us with the same procedure as before of simply dividing by 26 repeatedly. In essence, g() implements a proper change-of-base procedure: A is now the first letter in our alphabet, because a remainder of 0 now results in its character code 65 and Z is still the last character.

And that's it! g() will print the chars for the column in reverse order as described above, and then emit the rows portion immediately after, then go to the next test case.

Please comment / criticize / ask questions if you feel like this explanation can be improved in any way (I'll publish edits over time).

История

 
 
 
 
Правки
 
 
  Rev. Язык Кто Когда Δ Комментарий
en28 Английский jsgoller1 2022-07-04 03:21:00 5 Tiny change: 'ut**: For test case' -> 'ut**: For each test case'
en27 Английский jsgoller1 2022-07-04 03:15:03 2
en26 Английский jsgoller1 2022-07-04 03:13:58 17 Tiny change: ' variation):\n\n<spo' -> ' variation of the following):\n\n<spo'
en25 Английский jsgoller1 2022-07-04 03:12:12 31 Tiny change: 'in any way. ' -> 'in any way (I'll publish edits over time). ' (published)
en24 Английский jsgoller1 2022-07-04 03:11:19 421
en23 Английский jsgoller1 2022-07-04 03:04:47 625
en22 Английский jsgoller1 2022-07-04 02:45:35 928
en21 Английский jsgoller1 2022-07-04 02:06:15 573
en20 Английский jsgoller1 2022-07-04 02:00:38 735
en19 Английский jsgoller1 2022-07-04 01:45:29 1172
en18 Английский jsgoller1 2022-07-04 01:42:24 1138
en17 Английский jsgoller1 2022-07-04 01:22:39 337
en16 Английский jsgoller1 2022-07-04 01:19:48 535 Tiny change: 'xplicit:\n1. Deref' -> 'xplicit:\n\n1. Deref'
en15 Английский jsgoller1 2022-07-04 01:15:59 6
en14 Английский jsgoller1 2022-07-04 01:15:33 700
en13 Английский jsgoller1 2022-07-04 01:09:00 729 Tiny change: 't. \n\n### `for(x' -> 't. \n\n#### `for(x'
en12 Английский jsgoller1 2022-07-04 00:54:11 319
en11 Английский jsgoller1 2022-07-04 00:48:02 426
en10 Английский jsgoller1 2022-07-04 00:42:21 997
en9 Английский jsgoller1 2022-07-04 00:38:16 1026
en8 Английский jsgoller1 2022-07-04 00:20:29 31 Tiny change: 'ter way:\n~~~~~\ni' -> 'ter way:\n<spoiler summary="Solution">\n~~~~~\ni'
en7 Английский jsgoller1 2022-07-04 00:20:07 13 Tiny change: '.\n~~~~~\n\nThe so' -> '.\n~~~~~\n</spoiler>\n\nThe so'
en6 Английский jsgoller1 2022-07-04 00:19:35 1292
en5 Английский jsgoller1 2022-07-04 00:04:48 418
en4 Английский jsgoller1 2022-07-03 23:58:46 988 Tiny change: 'aints**:\n- Betwee' -> 'aints**:\n\n- Betwee'
en3 Английский jsgoller1 2022-07-03 23:48:17 48
en2 Английский jsgoller1 2022-07-03 23:47:33 4 Tiny change: 'iation):\n~~~~~\n ' -> 'iation):\n\n~~~~~\n '
en1 Английский jsgoller1 2022-07-03 23:47:16 745 Initial revision (saved to drafts)