Generalizing Segment Trees with Rust

Правка en20, от EbTech, 2020-04-13 23:05:34

This blog post outlines the design of a very general data structure for associative range queries, in the Rust programming language.

In the "real world", self-balancing binary search trees can be augmented to handle a variety of range queries. However, for contest problems, statically allocated variants are much easier to code and usually suffice. The contest community has come to know these data structures as segments trees. Here, I will generalize most segment trees that you can find in the wild into one polymorphic data structure, that can easily be copy-pasted during online competitions. I will call it an ARQ tree. ARQ is pronounced "arc", which has a similar meaning to "segment", but also stands for "Associative Range Query". It supports highly customizable range queries, the main requirement being that the aggregation operation must be associative.

Associativity and Semigroups

We begin with an array $$$a_0, a_1, a_2, \ldots, a_{n-1}$$$. Each $$$a_i$$$ belongs to a semigroup $$$(S, +)$$$, where $$$+$$$ stands for any associative binary operation on $$$S$$$. In formal notation:

Associative Law: $$$+: S \times S \rightarrow S$$$ satisfies $$$(a + b) + c = a + (b + c)$$$ for all $$$a, b, c \in S$$$.

Because $$$+$$$ is associative, we can drop the parentheses and talk about range aggregates of the form $$$a_l + a_{l+1} + \ldots + a_r$$$.

The ARQ Problem

In the Associative Range Query problem, we wish to support two types of queries:

  • Given bounds $$$l$$$ and $$$r$$$, compute the aggregate $$$a_l + a_{l+1} + \ldots + a_r$$$.

  • Given bounds $$$l$$$ and $$$r$$$, and a function $$$f: S \rightarrow S$$$, replace $$$a_i$$$ with $$$f(a_i)$$$ for all $$$l \le i \le r$$$.

In typical instances where computing $$$a + b$$$ or $$$f(a)$$$ take $$$O(1)$$$ time, we wish to support each query in $$$O(\log n)$$$ time.

Identity and Monoids

Perhaps you've heard of range queries over a monoid. A monoid is simply a semigroup with a special identity element:

Identity Law: $$$id\in S$$$ satisfies $$$a + id = id + a = a$$$ for all $$$a \in S$$$.

We represent Semigroup and Monoid using Rust traits. The Rust compiler will not verify the associative and identity laws, so it's the programmer's job to check them when implementing these functions:

trait Semigroup {
    fn compose(&self, other: &Self) -> Self;
}

trait Monoid: Semigroup {
    fn identity() -> Self;
}

Equivalence

In practice, there is not much difference between a semigroup and a monoid, and either of the two would suffice for our purposes. This is because a semigroup can always be extended into a monoid by adding an identity element. In this Rust implementation, the Monoid's advantage is that it can clone (i.e., make copies of) elements, by composing them with the identity. Thus, the trait bound Monoid turns out to be equivalent to Semigroup + Clone. To illustrate, here is the conversion from Semigroup + Clone to Monoid, using Option<T> to denote "T or the identity":

impl<T: Semigroup + Clone> Semigroup for Option<T> {
    fn compose(&self, other: &Self) -> Self {
        match self {
            Some(ref a) => match other {
                Some(ref b) => Some(a.compose(b)),
                None => self.clone()
            },
            None => other.clone()
        }
    }
}

impl<T: Semigroup + Clone> Monoid for Option<T> {
    fn identity() -> Self {
        None
    }
}

Conversely, a Monoid is already a Semigroup and can implement Clone via composition with the identity element:

impl<T: Monoid> Clone for T {
    fn clone(&self) -> Self {
        self.compose(T::identity())
    }
}

ARQ API v1: Pointwise Updates

Now that we understand Semigroup + Clone as equivalent to Monoid, the choice between the two becomes an implementation detail, which may have tradeoffs in performance and ergonomics depending on the application. Personally, I found it easier to work with the Monoid trait. Our first API will not support full range updates, but only pointwise updates:

pub struct ArqTree<T> {
    val: Vec<T>
}

impl<T: Monoid> ArqTree<T> {
    pub fn modify(&mut self, pos: usize, f: &dyn Fn(&T) -> T) {
        // implement modify
    }
    
    pub fn query(&self, l: usize, r: usize) -> T {
        // implement query
    }
}

I won't provide a full implementation: you may use other segment tree guides as a reference. In summary, we build a complete binary tree on top of our array. tree.modify(pos, f) will replace $$$a_{pos}$$$ by $$$f(a_{pos})$$$, then recompute each of the ancestors of $$$a_{pos}$$$ by applying $$$+$$$ to its two children. This will work with no restrictions on the function $$$f$$$. Its time complexity is comprised of one application of $$$f$$$ and $$$O(\log n)$$$ applications of $$$+$$$.

Shortcomings of the v1 API

Our simple v1 API can't support efficient range updates! In order to update an entire range efficiently, we will need to apply $$$f$$$ lazily, storing it in internal nodes of the tree to eventually be pushed toward the leaves. If multiple updates are performed, we may have to store a composition of updates for postponed application. While one may implement a composition operation $$$f \circ g$$$ which simply first calls $$$g$$$ and then calls $$$f$$$, this makes the cost of function application no longer $$$O(1)$$$!

Thus, we must switch from function pointers to an implicit, composable representation for $$$f$$$. The composition of "add 5" and "add 7" is not "add 5 and then 7"; rather, it's "add 12": we should store the number 12 instead of the adding functions.

To recap, now we have a monoid $$$(S, +)$$$ of array elements, as well as a second monoid $$$(F, \circ)$$$ whose set $$$F \subset S\rightarrow S$$$ consists of the update functions that we're interested in. Why is $$$F$$$ a monoid? Well, it's easy to check that function composition is associative, making it at least a semigroup. And then, just as before, can choose whether to have F: Monoid or F: Semigroup + Clone. For $$$F$$$, I found the latter to be more ergonomic.

However, these are not simply two independent monoids! The sets $$$S$$$ and $$$F$$$ interact, with functions from $$$F$$$ acting on elements from $$$S$$$ to produce the newly updated elements of $$$S$$$. While we're at it, I'm actually not too happy with the Semigroup and Monoid traits. There's more than one way for a type, say 32-bit integers, to be a monoid: the operation could be addition, multiplication, minimum, maximum, leftmost non-identity value, etc. With this design, we'd have to wrap our i32s in distinct wrappers for each Monoid implementation, and that's ugly.

But remember that a struct is just a collection of data. A struct's impl is a collection of functions, and possibly some associated type and constants. Typically, functions inside an impl take a special self element, and are called methods, but this is not strictly necessary. So we can instead define a trait that packages the two types $$$S$$$ and $$$F$$$, alongside functions that act on these types!

ARQ API v2: Range Updates

pub struct ArqTree<T: ArqSpec> {
    app: Vec<Option<T::F>>,
    val: Vec<T::S>,
}

impl<T: ArqSpec> ArqTree<T> {
    pub fn modify(&mut self, l: usize, r: usize, f: &T::F) {
        // implement modify
    }
    
    pub fn query(&mut self, l: usize, r: usize) -> T::S {
        // implement query
    }
}

pub trait ArqSpec {
    type S;
    type F: Clone;

    /// For eager updates, compose() can be unimplemented!(). For lazy updates:
    /// Require for all f,g,a: apply(compose(f, g), a) = apply(f, apply(g, a))
    fn compose(f: &Self::F, g: &Self::F) -> Self::F;
    /// For eager updates, apply() can assume to act on a leaf. For lazy updates:
    /// Require for all f,a,b: apply(f, op(a, b)) = op(apply(f, a), apply(f, b))
    fn apply(f: &Self::F, a: &Self::S) -> Self::S;
    /// Require for all a,b,c: op(a, op(b, c)) = op(op(a, b), c)
    fn op(a: &Self::S, b: &Self::S) -> Self::S;
    /// Require for all a: op(a, identity()) = op(identity(), a) = a
    fn identity() -> Self::S;
}

This version supports the previous setting of pointwise updates as well. In that case, identity() and op() must satisfy their respective monoid laws, but apply() can apply any arbitrary function, and compose() can remain unimplemented or even crash because my compose() is never called during a modify() with l == r.

However, if we plan to do range modifications, i.e., with l < r, then $$$f$$$ may be applied to internal nodes of the tree! To ensure consistency, we require two additional laws:

Composition Law: $$$(f \circ g)(a) = f(g(a))$$$ for all $$$f, g \in F$$$, $$$a \in S$$$

Distributive Law: $$$f(a + b) = f(a) + f(b)$$$ for all $$$f \in F$$$, $$$a, b \in S$$$

The composition law implies that $$$F$$$ is a semigroup, and the distributive law ensures consistent interactions between $$$S$$$ and $$$F$$$ throughout the tree!

Example: Range Minimum Query

To see how to specialize this API, let's see solve the following classic problem:

  • Given bounds $$$l$$$ and $$$r$$$, compute the minimum of $$$a_l, a_{l+1}, \ldots, a_r$$$.

  • Given bounds $$$l$$$ and $$$r$$$, and a number $$$f$$$, replace $$$a_i$$$ with $$$f + a_i$$$ for all $$$l \le i \le r$$$.

The first monoid $$$S$$$ consists of the numerical array elements with the minimum operation. The second monoid $$$F$$$ consists of functions which add a constant: they are most conveniently represented by literally storing that constant. All four functions are one-liners:

pub enum RMQ {}
impl ArqSpec for RMQ {
    type S = i64;
    type F = i64;
    fn compose(&f: &i64, &g: i64) -> i64 {
        f + g
    }
    fn apply(&f: &i64, &a: i64) -> i64 {
        f + a
    }
    fn op(&a: &i64, &b: &i64) -> i64 {
        a.min(b)
    }
    fn identity() -> i64 {
        i64::max_value()
    }
}

// Instantiate with:
let mut rmq_tree = StaticArq::<RMQ>::new(&vec);

Note that the programmer must manually verify the four laws (only two if range updates are not used). In some cases, your operations may need access to the size or position of the subtree corresponding to the current node. This does not require an extension of the API: the monoid type $$$S$$$ can simply be made a tuple which contains this additional information. For examples of the ARQ tree in action, please see: ARQ tree example usage on Github

Static Implementation

static_arq.rs

To keep this blog post focused on the abstraction and general API, I left the implementation details here as a GitHub link. Indeed, the key advantage of these abstractions is that I almost never have to think about segment tree code! I only have to worry about ensuring that my custom operation satisfies the four laws.

If you're interested in the details, this is a binary-indexed ARQ tree based on a very cool blog post by Al.Cash, so I would recommend reading his explanations!

Dynamic Sparse/Persistent Implementation

dynamic_arq.rs

A dynamically allocated version of this data structure can initialize its leaves (potentially more than $$$10^{18}$$$ of them!) to the identity in $$$O(1)$$$ time, using a lazy construction. It supports some splitting and merging operations, as well as persistence. Most of its methods require an ArqView parameter, which determines which node to treat as the root of the tree. When the is_persistent flag is turned on, previously generated ArqView objects remain valid and immutable, thus preserving access to all earlier states of the data structure. However, when the flag is turned on, only the more recently generated ArqView should be considered valid, while the others may be destroyed.

Typically, the data structure is only modified (and new ArqViews generated) by calls to modify(). However, advanced users may directly make use of push()/pull() to dig inside the tree. This is useful, for example, when binary searching. Since changes are lazily propagated, only the root node is valid at first. We gain access to its subtrees as follows:

let (lchild_view, rchild_view) = arq_tree.push(root_view);
// If we make changes to either or both child subtrees, we must pull them up afterwards:
arq_tree.pull(root_view);

Conclusions

This is a side project that I built in summer 2017, expanded upon in summer 2019, and only now in 2020 had the chance to write about. Please let me know if you'd like something to be explained in more detail :)

Теги rust, #segment tree, #lazy propagation, #persistence, monoid

История

 
 
 
 
Правки
 
 
  Rev. Язык Кто Когда Δ Комментарий
en30 Английский EbTech 2020-04-14 07:01:18 30 Tiny change: 's _segments trees_. H' -> 's _segment trees_. H'
en29 Английский EbTech 2020-04-14 05:55:59 4 Tiny change: 't as with _S_, we can c' -> 't as with $S$, we can c'
en28 Английский EbTech 2020-04-14 05:55:06 17 Tiny change: ', just as before, can choos' -> ', just as with _S_, we can choos'
en27 Английский EbTech 2020-04-14 05:46:13 5 Tiny change: 'push()`/`pop()` API ma' -> 'push()`/`pull()` API ma'
en26 Английский EbTech 2020-04-14 04:59:38 3732 Tiny change: 'ongs to a semigroup $(S, +)$;' -> 'ongs to a _semigroup_ $(S, +)$;'
en25 Английский EbTech 2020-04-14 03:10:53 63
en24 Английский EbTech 2020-04-14 03:09:03 169 Tiny change: 'pagation, based on ' -> 'pagation, which I like to call an ARQBIT. It's based on '
en23 Английский EbTech 2020-04-14 02:53:27 1126 Advanced Usage section
en22 Английский EbTech 2020-04-13 23:23:05 23 Tiny change: ' ARQ tree based on ' -> ' ARQ tree with lazy propagation, based on '
en21 Английский EbTech 2020-04-13 23:20:44 647
en20 Английский EbTech 2020-04-13 23:05:34 304
en19 Английский EbTech 2020-04-13 22:38:38 1708 Tiny change: '}\n~~~~~\nIn pract' -> '}\n~~~~~\n\n### Equivalence\n\nIn pract'
en18 Английский EbTech 2020-04-13 02:31:13 18
en17 Английский EbTech 2020-04-13 01:11:47 2 Tiny change: ' S \times X \rightarr' -> ' S \times S \rightarr'
en16 Английский EbTech 2020-04-13 01:10:47 81
en15 Английский EbTech 2020-04-13 01:08:33 1742 Tiny change: ')$, where + stands fo' -> ')$, where $+$ stands fo' (published)
en14 Английский EbTech 2020-04-13 00:43:22 5983
en13 Английский EbTech 2020-04-13 00:19:49 705 Tiny change: 'a_{l+1} + ... a_r$.\n\n' -> 'a_{l+1} + \ldots + a_r$.\n\n'
en12 Английский EbTech 2020-04-12 23:56:40 741 Tiny change: ' language.\n\nIn the' -> ' language. $\sqrt{3}$\n\nIn the'
en11 Английский EbTech 2019-07-25 22:44:43 67
en10 Английский EbTech 2019-07-25 22:43:58 6 Tiny change: 'sentation]\n//! (http://co' -> 'sentation](http://co'
en9 Английский EbTech 2019-07-25 22:43:12 969
en8 Английский EbTech 2019-07-25 22:38:33 821
en7 Английский EbTech 2019-07-25 22:31:36 710
en6 Английский EbTech 2019-07-25 22:19:38 2061
en5 Английский EbTech 2019-07-25 22:01:00 1493
en4 Английский EbTech 2019-07-16 10:30:56 2 Tiny change: 'ing law:\n~~~~~\nt' -> 'ing law:\n\n~~~~~\nt'
en3 Английский EbTech 2019-07-16 10:30:18 1217
en2 Английский EbTech 2019-07-16 06:20:45 1916 Tiny change: 'usize, f: fn(&T) -> T' -> 'usize, f: &dyn Fn(&T) -> T'
en1 Английский EbTech 2019-07-16 05:23:54 1106 Initial revision (saved to drafts)